i read the star instructions, but i am still not clear on how to install the fuel pressue regulator? can someone help me out with what lines go to what? i know the line from the fuel pump goes onto the bottom, but which one there are 2. and what goes into the other 2 fittings. please help? do you have to connect it to the stock regulator.
-Todd

read down a few posted theres a kid hookin up a star kit with the fmu and dino hit him up with the answer already.

this is from my post wehre i asked basically the same question..i have a 96 2g..

"Your fuel pressure regulator is in the rear of the car, near the rear passenger side tire. There is a short (6-8") return line from that to the tank cover / fuel pump access cover. Take the blue FMU, and run the return line off the regulator to the SIDE barb fitting. Run the remainder of the line from the BOTTOM barb fitting back to the return inlet on the fuel pump access cover. The smaller TOP nipple takes a vacuum line. Run one from the front of the car back to that nipple. Shoehorn the regulator up and out of the way with zipties or a large hoseclamp."