Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectHRC return line question
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=71412
71412, HRC return line question
Posted by flamineclipse, May-22-04 04:44 PM
I'm installing my fuel system while my motor is out and I was wondering how you guys ran the return line. I squeezed it in between the firewall and cross member. Just above where the control arm mounts, and where the factory hard lines run in. It's tight but not crushed. Is this right? How did you put your's in?



Oh, you don't like altezza's? Too bad, your gonna get a good look at mine.
71413, RE: HRC return line question
Posted by jsupetran, May-22-04 04:49 PM
I didn't squeeze mine between the hardline. I zipped tied it.
-------jezreel
1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler
Boostin since Aug 03.

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting :thumbsup

71415, RE: HRC return line question
Posted by flamineclipse, May-22-04 04:53 PM
Originally posted by jsupetran
I didn't squeeze mine between the hardline. I zipped tied it.


No, not the hard line. I'm talking about the rubber line that comes from the craptech out line and goes to the aluminum line. I did zip tie that one.



Oh, you don't like altezza's? Too bad, your gonna get a good look at mine.
71422, RE: HRC return line question
Posted by techboy, May-22-04 05:37 PM
Yup, that's it, I pretty much ran my the same way. There's like 3 or 4 routes that you can fish it up through, but they are all pretty much the same.
71423, RE: HRC return line question
Posted by GhEttOrAiD, May-22-04 06:51 PM
between firewall and crossmember

what the hell

do HRC kits not require you to bung the oilpan?
71424, RE: HRC return line question
Posted by jsupetran, May-22-04 06:55 PM
We're talking about the fuel return line, not the oil NOOB j/k :P


-------jezreel
1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler
Boostin since Aug 03.

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting :thumbsup

71425, RE: HRC return line question
Posted by Steve, May-22-04 06:57 PM
lol I was confused to I thought it was the oil return line to man
71426, RE: HRC return line question
Posted by turbo8u, May-22-04 06:57 PM
i just followed the other hardlines and zip tied it, double dlamps on the hardline to 3/8 rubber line
_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons