Is anyone aware of any site that i can purchase a oil feed line and return line from online ??? The feed line has to hook up or fit into the pressure sensor slot from the back of the engine, and i need to know what would fit that, as for the return since i have to make that all custom i guess just a regular feed return line would work, and what do u guys recommend i seal my oil return line up with, like to patch up the hole to make sure it has no leaks. Thanks

you dont need to keep puting Custom DSM 420a ECLIPSE RS in the title of all your posts. we all have rs 420a's here. (mostly).

what turbo are you running?

www.hahnracecraft.com

I believe they sell oil line kits for the 420a.

What would you have to do to the Oil feed and Return lines if your making a custom turbo with an 14b turbo.

dude go to my immagestation site *link in sig*, and check out the setup in there.

you can order from most places that make hydrolic hose. You WILL need a special fitting for your 14B that attaches to the bolt that seals up that sucker, or get a bulkhead fitting that will work. I know :). I have a 14b on my ride.

Originally posted by RxR_Eclipse
dude go to my immagestation site *link in sig*, and check out the setup in there. you can order from most places that make hydrolic hose. You WILL need a special fitting for your 14B that attaches to the bolt that seals up that sucker, or get a bulkhead fitting that will work. I know :). I have a 14b on my ride.

Man I appreciate the link it helps out alot, I have a couple of more question i was wondering if u could clear up
1)How did you cheat the water line
2)Did you use a regular silicone line to run from the oil pan to the bottom of the turbo.
3)Did you have to modify the internal wastgate for the 14b

Im just curious of other things I need to pick up and I was figuring that I just need to pick up 2 braided hoses one to send to the oil pan and the other to send to the oil sending unit with an oil feed fitting.