Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectCustom Turbo Oil Return on DSM 420a engine, Quick Question - PIC
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=70714
70714, Custom Turbo Oil Return on DSM 420a engine, Quick Question - PIC
Posted by Eclipsemblue, May-10-04 08:47 AM


is that is my oil pan, were i drain the old oil out ect, is that were i drill out a oil return line for my turbo?? and if so how do i drop this oil pan out cause obviously i cant drill a hole for it being attached.
70716, RE: Custom Turbo Oil Return on DSM 420a engine, Quick Question - PIC
Posted by JasonESi_T, May-10-04 09:02 AM
Yes, it's your oilpan. You would drop the pan by unbolting all the bolts all the way around the perimeter of the pan. There's a bracket on the side of the pan that's obstructing some of the bolts. You'll need to unbolt that bracket as well to get all of the bolts out.

70717, RE: Custom Turbo Oil Return on DSM 420a engine, Quick Question - PIC
Posted by evan2, May-10-04 09:05 AM
make sure you DRILL the highest point on the pan..dont put it low so that you have oil backing up the return..
70727, RE: Custom Turbo Oil Return on DSM 420a engine, Quick Question - PIC
Posted by EvuLFleA, May-10-04 10:40 AM
Originally posted by JasonESi_T
Yes, it's your oilpan. You would drop the pan by unbolting all the bolts


:scratch

Good job Jason!
70730, RE: Custom Turbo Oil Return on DSM 420a engine, Quick Question - PIC
Posted by JasonESi_T, May-10-04 11:44 AM
Originally posted by EvuLFleA
Originally posted by JasonESi_T Yes, it's your oilpan. You would drop the pan by unbolting all the bolts
:scratch Good job Jason!


Hahaha...heed my words of wisdom!

70741, RE: Custom Turbo Oil Return on DSM 420a engine, Quick Question - PIC
Posted by Uberingram, May-10-04 12:52 PM
Originally posted by JasonESi_T
Originally posted by EvuLFleA
Originally posted by JasonESi_T Yes, it's your oilpan. You would drop the pan by unbolting all the bolts
:scratch Good job Jason!
Hahaha...heed my words of wisdom!


Don't forget to drain it while you're down there. :P
70861, RE: Custom Turbo Oil Return on DSM 420a engine, Quick Question - PIC
Posted by ben@importparts, May-12-04 02:32 PM
For those who were asking about finding an oil return line, we have done all the homework for you:

http://www.importparts.com/shop/product_info.php?products_id=4903