| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | egt gauge and turbo manifold |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=70699 |
70699, egt gauge and turbo manifold
Posted by MitsuEclipseGS, May-10-04 06:26 AM
where do i drill the hole for the probe on the egt gauge? does it matter if the probe is on the top or the bottom of the manifold?
-Todd
|
70700, RE: egt gauge and turbo manifold
Posted by evan2, May-10-04 06:28 AM
id put it on the hottest cyl, for my honda it was cyl 3. Find out from the other boys here, it could be the same
top is fine, i dont see a issue with putting it under but id rather have it up top where i could see it
if the mani is on the car just let the car run then drill the hole
|
70702, RE: egt gauge and turbo manifold
Posted by grain, May-10-04 06:38 AM
cyl 4 is where i have mine. drilled on the side of the manifold
|
70713, RE: egt gauge and turbo manifold
Posted by MitsuEclipseGS, May-10-04 08:29 AM
do you have a pic of where it is at, just so i get everything right. also i am drilling before it goes on the car. who hard is it to drill through the manifold?
-Todd
|