Where can i find one of these. Hrc put the bov flange in the wrong place. It points towards the ecu and fuse box. I need help ASAP!!

Pics??

what do you mean wrong angle? the BOV mounting point should point straight up towards the hood when the pipe is installed correctly.

anyway...

here ya go...

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=33742&item=2476104601&rd=1

it will work unless you got some basterdized pipe. what BOV you using? my ECU is even pushed forward cause my the MSD.

i am using the rfl and from what my friend said is that is is pointing towards the ecu and fuse box. He knows alot about turbo parts and stuff and i trust him when he says it wont work

i have the hrc kit, and the rfl. mine works fine.

tell your friend to try it anyway, i thought the same thing before i got it all bolted up, that it wasn't going to work, but obviously it does. so...go look your self or make him SHOW you it wont work. if its a true HRC pipe, it WILL work.

It is a true hrc pipe and it will not work but i found a rad. hose bent in a 90 and used that until my turbo xs 90 comes in

Originally posted by Sitinlo
It is a true hrc pipe and it will not work but i found a rad. hose bent in a 90 and used that until my turbo xs 90 comes in

Well obviously its NOT a TRUE hrc pipe since the TRUE hrc pipes, in fact, DO work with that BOV as you can clearly see from the above posted pics and from the experiences of other users here... maybe you got a bastard "fake" hrc pipe or your friend is wrong???

Originally posted by Sitinlo
He knows alot about turbo parts and stuff and i trust him when he says it wont work

I'm not dogging you but these lines always make me giggle.

Originally posted by Sitinlo He knows alot about turbo parts and stuff and i trust him when he says it wont work

well, not to be a dick or anything, but since its YOUR car and YOUR turbo, dont you think YOU should know a lot about turbos?

look at the pics man, they dont lie! and like i said, my ECU is pushed closer becuase of the MSD.
Bottom line, either your friend is wrong, or you dont have an HRC pipe for the 420a! period.

well like i said i tried everything to make it fit but i had to make a 90 bc the flange was put like 2 or 3 inches further down from your flange TIM!! And i know alot about turbo stuff to its just that he was installing everything b/c i have to work all the time and i didnt have time to go by there and check it out til the next day

Originally posted by Sitinlo
the flange was put like 2 or 3 inches further down

OH! well, you didnt say THAT before. In that case, yea your fucked! :7