Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectThis might sound stupid...
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=70067
70067, This might sound stupid...
Posted by FlyinEsi, Apr-29-04 01:01 PM
Would the EGT's be lower if I took off the heat shield around the turbo?? Would I have less power by having lower EGT's? Can the turbo get hot enough to melt the fan? it's only like 5 inches away...

Sorry if this is dump, just curious.



Reverse El-Glo HVAC Panels Update: Specs received
Expected Release Date: May 14th
70068, RE: This might sound stupid...
Posted by turbo8u, Apr-29-04 01:06 PM
Originally posted by FlyinEsi
Would the EGT's be lower if I took off the heat shield around the turbo??


*slightly* maybe yes, heat is dissipated better and not held in by that heat shield, if anything it might just cool off faster

Originally posted by FlyinEsi
Would I have less power by having lower EGT's?


hotter exhaust gasses flow faster, that the point...but i doubt you're losing any power


oh and about the fan. i doubt it will melt, but its possible. 1600 degrees is no joke, that'll melt a lot of shit. i'd throw the heatshield back on, why not?



_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes

70069, RE: This might sound stupid...
Posted by BoostedGS, Apr-29-04 01:12 PM
Although removing your heat shield may lower your EGT's slightly, it will probably make your intake air temps higher. High or low EGT's don't necessarily mean more or less HP, it's a tool for monitoring engine performance. Are you currently having a problem with your EGT's being too high?

And yes, you fan could and probably will melt if you remove the shield. A few of my friends with 4g63's and upgraded turbos have melted theirs.
70071, RE: This might sound stupid...
Posted by FlyinEsi, Apr-29-04 01:22 PM
Originally posted by BoostedGS
Although removing your heat shield may lower your EGT's slightly, it will probably make your intake air temps higher. High or low EGT's don't necessarily mean more or less HP, it's a tool for monitoring engine performance. Are you currently having a problem with your EGT's being too high? And yes, you fan could and probably will melt if you remove the shield. A few of my friends with 4g63's and upgraded turbos have melted theirs.


Thanks Boosted...that's all I needed to hear. I have the heat shield on, but I wanted to take it off to show off the turbo, that's all.



Reverse El-Glo HVAC Panels Update: Specs received
Expected Release Date: May 14th
70072, RE: This might sound stupid...
Posted by turbo8u, Apr-29-04 01:48 PM
Originally posted by FlyinEsi
I have the heat shield on, but I wanted to take it off to show off the turbo, that's all.


lol, you already have GSX on the back :P aka, turbo awd



_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes