2GNT.com Forums - Printer friendly page, topic ID #69810 -

69810, DSM injectors wright up??
Posted by Greg, Apr-25-04 12:25 PM

Where did that 450cc DSM injector wright up go?? I tried to search but no luck. I know I have seen it here somewhere just can't find it again! Thanks guys

69811, RE: DSM injectors wright up??
Posted by Uberingram, Apr-25-04 12:26 PM

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=26&topic_id=148&mesg_id=148&page=

Edit: HOLY FUCK! 9000 posts!

69824, RE: DSM injectors wright up??
Posted by soldier101, Apr-25-04 05:46 PM

you my friend have a shitload of posts

69832, RE: DSM injectors wright up??
Posted by eclipzGST, Apr-25-04 06:46 PM

Originally posted by soldier101
you my friend have a shitload of posts

or a load of shit-posts.? :shrug

69852, RE: DSM injectors wright up??
Posted by Uberingram, Apr-26-04 08:29 AM

Originally posted by eclipzGST
Originally posted by soldier101 you my friend have a shitload of posts
or a load of shit-posts.? :shrug

Love you too, asshat. :thumbsup

69894, RE: DSM injectors wright up??
Posted by Greg, Apr-26-04 07:18 PM

Back to my post. I know I have seen a wright up on this shit. My real question is: Is the resistor on the negative or positive side of the injector?? and anyone have a wire color break down?? thanks

69895, RE: DSM injectors wright up??
Posted by Uberingram, Apr-26-04 07:24 PM

Originally posted by Greg
Back to my post. I know I have seen a wright up on this shit. My real question is: Is the resistor on the negative or positive side of the injector?? and anyone have a wire color break down?? thanks

Why don't you PM the author of that thread I posted. :shrug

69899, RE: DSM injectors wright up??
Posted by MrSlick, Apr-27-04 12:04 AM

Originally posted by Uberingram
Originally posted by Greg Back to my post. I know I have seen a wright up on this shit. My real question is: Is the resistor on the negative or positive side of the injector?? and anyone have a wire color break down?? thanks
Why don't you PM the author of that thread I posted. :shrug

That would be me...

You want to put the resistors on the ecu side of the injectors.

70182, RE: DSM injectors wright up??
Posted by Greg, May-01-04 07:05 AM

What side or (color) wires is the ECU side? Anyone else comment on resitor placement?

70229, RE: DSM injectors wright up??
Posted by MrSlick, May-02-04 04:46 AM

Originally posted by Greg
What side or (color) wires is the ECU side? Anyone else comment on resitor placement?

Do it the way I did... it works...

As for the colors... here:

Red: +12V
Light Green/Black: Injector #1 ECU Ground
Yellow/Red: Injector #2 ECU Ground
Yellow/Green: Injector #3 ECU Ground
Light Green/Red: Injector #4 ECU Ground

So what you need to do is put the resistors on the ECU Ground side of the injetcors... why? Because it's a lot easier to wire... if you look at the wiring harness there's just the one 12V feed at the injector harness conector, but four wires coming back to the ECU... the +12V is split up in the injector harness... so it's a lot easier to use the GND side... trust me.

And don't try just putting the one resistor on the +12V feed side for all the injectors to share... this is a bad idea... would work at idle and low rpm, but as soon as the injector openings start to cross over at high rpm's the resistance seen by the ECU will change.... bad idea.

Lee.