| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | Car cutting off and not starting back (auto to 5 speed) | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=69668 |
69668, Car cutting off and not starting back (auto to 5 speed)
Posted by carolinacat, Apr-23-04 01:57 AM
Its a 96 gs with my own turbo kit. The car was a auto and i switched it to a 5 speed. Everytime you shift it while driving hard it will die and not restart until you get out and reset the computer. When its dead it has No spark. Any ideas why this is happening. I took the tcu out from under the dash and wired all the other stuff up to work when i put the 5 speed in (cruise clutch speedo etc....) Its getting to be agravating you cant drive the car hard and yank gears(the whole point of having a 5 speed.)
Mods:
Custom turbo setup, T4 Turbo with Stainless Manifold, 3inch DP, 440 injectors, Tial Waste gate, Tial Blow off, Huge Spearco Front Mount , Tanabe Racing Medallion , Eagle rods, Weisco Pistons, Aem Cam gears, Crane cams 0014, SPEC stage 3 clutch, Fidanzi flywheel, Phantom Grip, Ground Controls, KYB AGX’S, Baer 13” Brakes, AEM big brakes in rear, Apexi SAFC, Apexi AVCR, Recaro SRD seats, Sparco Harness, Sparco Steering Wheel, Carbon fiber hood, Full Blitz Body Kit (molded), Shaved door handles, 18”Volk GTN,s, Four point cage
PLUS MORE
In HCI magazine March 04'
Heres some Pics In HCI magazine March 04'
http://groups.msn.com/Twinturbomustangpictures/ttstang.msnw?action=ShowPhoto&PhotoID=12
http://groups.msn.com/Twinturbomustangpictures/ttstang.msnw?action=ShowPhoto&PhotoID=13
|
69671, RE: Car cutting off and not starting back (auto to 5 speed)
Posted by babybeclipse, Apr-23-04 04:42 AM
damn, that sux. almost sounds like something is loose or you have a bad ECU. dunno man :shrug
|
69672, RE: Car cutting off and not starting back (auto to 5 speed)
Posted by Blitzsuperstar, Apr-23-04 04:55 AM
do you have an FCD?
|
69679, RE: Car cutting off and not starting back (auto to 5 speed)
Posted by Slow_AT_Talon, Apr-23-04 06:12 AM
it is not your ECU! My friend has a 97 Talon and has the same problem but only in first gear. He has swapped the ECU and still had the same problem. I'm not sure what it is yet when I am I'll post.
|
69711, RE: Car cutting off and not starting back (auto to 5 speed)
Posted by carolinacat, Apr-23-04 03:50 PM
Its not the ecu i have swapped it a few times. And i use to think it was only in first gear that it would do it but it will do it in any gear. But only under hard shifts. Driving normally on it and its fine. Ive got to figure this out. Anymore ideas.
|
70328, RE: Car cutting off and not starting back (auto to 5 speed)
Posted by carolinacat, May-04-04 02:05 AM
Ok i figured out what is going on i went to a car show this weekend and it got worse until every time you shifted it would run like crap. I checked the CEL and it thru the map sensor # i put a new one in and bought a missing link and this took care of it. No more cutting off when driving the wheels of of it. So i guess OBD1 cars need the missing link or eventually the map sensor gets screwed up.
Mods:
Custom turbo setup, T4 Turbo with Stainless Manifold, 3inch DP, 440 injectors, Tial Waste gate, Tial Blow off, Huge Spearco Front Mount , Tanabe Racing Medallion , Eagle rods, Weisco Pistons, Aem Cam gears, Crane cams 0014, SPEC stage 3 clutch, Fidanzi flywheel, Phantom Grip, Ground Controls, KYB AGX’S, Baer 13” Brakes, AEM big brakes in rear, Apexi SAFC, Apexi AVCR, Recaro SRD seats, Carbon fiber hood, Full Blitz Body Kit (molded), Shaved door handles, 18”Volk GTN,s, Four point cage
PLUS MORE
In HCI magazine March 04'
Heres some Pics In HCI magazine March 04'
http://groups.msn.com/Twinturbomustangpictures/ttstang.msnw?action=ShowPhoto&PhotoID=12
http://groups.msn.com/Twinturbomustangpictures/ttstang.msnw?action=ShowPhoto&PhotoID=13
|
70370, RE: Car cutting off and not starting back (auto to 5 speed)
Posted by babybeclipse, May-05-04 03:40 AM
Good to hear you got it figured out.
| |