| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | Rich at idle | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=69528 |
69528, Rich at idle Posted by python6586, Apr-21-04 08:14 AM
i have 440cc injectors and the sfmu. now at idle my pressure is around 25psi and i cant get it any lower, i have the 2.72 disc with the ring that fits the closest(since im told there is not a direct matching ring for taht disc) and i have the hard dark spring installed, i cant get the pressure any lower, i have the top screw all the way out and all the ports closed up all the way, do i need that vaccum restricor on the boost/vac. line, will that help any, btw i plan on running 15lbs of boost with this set-up. how the hell are some of you guys goin all the way down to 10psi of fuel pressure, also is there suppose to be a spring retainer on both ends of the spring or just on the top side where the screw goes?
 Mods: CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit
|
69544, RE: Rich at idle Posted by Avenger, Apr-21-04 12:03 PM
What is your fuel return line setup? If it is too restrictive you will not be able to lower your fuel pressure past a certain point.
|
69546, RE: Rich at idle Posted by python6586, Apr-21-04 12:42 PM
its a larger than stock braided s.s line thats wut i dont understand. what if i would take the spring out completely, it seems to bring my fuel pressure at idle right where it needs to be, is the spring just used for idle, or will it affect my pressures under boost as well
 Mods: CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit
|
69547, RE: Rich at idle Posted by XtremeRS, Apr-21-04 12:48 PM
Try using the longer, silver spring inside the SFMU. Its used to run lower idle fuel pressures. It may give a slightly less rate of gain on your fuel pressure though with whatever disk/ring you will use..
|
69548, RE: Rich at idle Posted by python6586, Apr-21-04 12:52 PM
last quick question then i will go try the silver spring, is there suppose to be a spring retainer on both ends of the spring or just on the top side(whre the adjustment screw pushes down)
 Mods: CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit
| |