| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | hmmm..... need some oil line help |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=69412 |
69412, hmmm..... need some oil line help Posted by jayden1, Apr-19-04 03:53 PM
ok i bought a used hahns stage one kit from a buddy. The only thing that wasnt included in the kit was the fuelpump, cartech regulator and the oil lines. Well i got one oil line, the drain line. I called hahnsracecraft to buy the oil supply kit which contains everything. Ive been put on hold for atleast 45 min everytime so im getting irritated. The one time i got through to someone i was told that i cant just buy the oil supply kit i have to buy a whole kit. So that leaves me blank. Does anybody know where i can buy the stuff i need to finish the oil lines. All i have is the drain line hanging off the turbo. The rest i know where to buy. It would even help if you could just tell me the thread pitch and size of the t connector for oil sending unit. I assume thats where that goes.
|
69416, RE: hmmm..... need some oil line help Posted by 95greenhrcgs, Apr-19-04 04:42 PM
I just recieved my oil feed line from them today. It was on backorder for the past 2 weeks. I guess they had a hard time getting them from their supplier.
Anyway, I think that they should be able to get you one, once you get a hold of them. Part # H TZ-9430
Other than that, look for my old post ( just a few days ago ) and look at the t-fitting setup that JasonESI-t explained to me. You should have all the info you need in that thread.
Good luck!
Jonathan
|
69418, RE: hmmm..... need some oil line help Posted by Uberingram, Apr-19-04 04:49 PM
Originally posted by 95greenhrcgs I just recieved my oil feed line from them today. It was on backorder for the past 2 weeks. I guess they had a hard time getting them from their supplier. Anyway, I think that they should be able to get you one, once you get a hold of them. Part # H TZ-9430 Other than that, look for my old post ( just a few days ago ) and look at the t-fitting setup that JasonESI-t explained to me. You should have all the info you need in that thread. Good luck! Jonathan
forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=68918&mesg_id=68918&page=2
|
69424, RE: hmmm..... need some oil line help Posted by 95greenhrcgs, Apr-19-04 05:12 PM
Thanks Uber
|
69493, RE: hmmm..... need some oil line help Posted by jayden1, Apr-20-04 03:19 PM
right on bro..... thanks alot. my buddy called hahns and told him he bought the kit and there are going to sell him the supply kit. but thanks for the thread.
|
69562, RE: hmmm..... need some oil line help Posted by 95greenhrcgs, Apr-21-04 04:11 PM
no problem
Just passing on what I know.
|