i started my turbo installed, basically i thought since i was waitin for shocks and the cars up in the air i should do it now while i'm waiting to get everything back together. i broke my craftsman 10 mm socket on the heat sheild on the mani tonight which put a huge damper on my progress. i wanted to have my stock mani and dp pulled off so i could install my tapped oil pan/crankscraper and let everything seal up for the 24 hrs but that wasn't the case tonight. (sucks) does any one have any advice or insight to help me out... i guess once i get that pulled it should be smooth sailing i'm just frustarted right now but i have to finish it at this point i'm not turning back.

smooth sailing isn't gonna happen, you'll have problems..just gotta have patience and 3 or 4 10mm sockets :) good luck with it

Yeah, get more 10mm sockets, get some deep mm sockets ranging 12-19 mm (but from harbor freights, and some long reaching, greatneck breaker bar to get to the bolts underneath the exhaust manifold. After that, the install was smooth sailing.

-------jezreel
1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler
Boostin since Aug 03.

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting :thumbsup

I am presently doing an install myself, and I found that PB Blaster works wonders. Go buy a can or two and spray up every bolt that is gonna eventually have to be removed. It helped me a lot.

GO to sears and get a craftman bolt remover. It looks like a socket with a sprial pattern inside. It makes those bolts a joke to remove. I believe it was a number 4 you need.

The best tool since sliced beard.

i've pb blasted everything a day or 2 before i started in on the install and its helped for some but i think i'll head up sears and pick up that bolt remover(sounds like fun). today its raining so i picked my fuel return lines and fittings. now i wait for the weather once again. thanks for the info so far guys. my to list seems soo big right now i just want to put a dent in part of it.