Hey guys, need a little advice...

bascially i have a star Stage I and added a starion ic. My fuel system consists of walboro 255, regular fmu with whatever the stage 1 disk is, 30lb injectors and an s-afc. Whenever im in boost, my egts raise very quickly and wont stop until i let off. I dont know what my fuel pressures are (star kit)...any advice to get this thing more fuel?? It it even possible to run decent with this setup? i really dont have the $ for the sfmu...

thanks for your help

i really need some direction. If you know of any resources that could help me, please direct me

What kind of boost are you running? You should really set up a FP guage even if it is just a mechanical one from under the hood. You also need to know exactly wich calibration disk you are using in your fmu. I am a sfmu user so I dont know exactly about the diff. fmu disks but if you give more info I am sure someone can giude you more.
Patrick
96 GS
14.14 @ 96.5 mph on 8psi 8 Nov.02
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

i run about 7-8 psi and im not sure what disk comes with the star stage I kit... thanks for your reply

I believe the disk the fmu comes with is 12:1. The high egts could be lack of fuel or too much fuel. What do you have your s-afc set at?