| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | Stupid Question... | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=67865 |
67865, Stupid Question... Posted by RonanUK, Mar-29-04 02:42 AM
Right, a lot of people are going to think this is a stupid question, but here's why I don't know...
I'm from the UK and importing an Eclipse, as they aren't available here, and can't find any info them. So I need to know a few things that are probably really easy answers to you lot...
Does the standard '95 Eclipse Turbo have a front mounted intercooler, and if so, how big is it?
What psi does a standard turbo run, and what bhp does it run as standard?
I did use the advanced search, but didn't have much luck...
thanks Ronan
|
67866, RE: Stupid Question... Posted by tim97rs, Mar-29-04 03:02 AM
Originally posted by RonanUK Does the standard '95 Eclipse Turbo have a front mounted intercooler, and if so, how big is it? What psi does a standard turbo run, and what bhp does it run as standard? I did use the advanced search, but didn't have much luck... thanks Ronan
1. no. side mount IC only. 2. 7-9 psi, i think. 3. about 220 bhp, form what i have heard.
someone feel free to correct me if im wrong.
|
67869, RE: Stupid Question... Posted by RonanUK, Mar-29-04 03:22 AM
Thanks. Apart from the bodykit and respray, a front mount intercooler and hard pipe set is next on the shopping list!
Ronan
|
67870, RE: Stupid Question... Posted by JasonESi_T, Mar-29-04 03:32 AM
Originally posted by RonanUK Does the standard '95 Eclipse Turbo have a front mounted intercooler, and if so, how big is it? What psi does a standard turbo run, and what bhp does it run as standard?
1. It does have a SMIC.
2. The T-25 runs 14.5 lbs of boost stock. The solenoid may lower it though when the ecu/knock sensor detects any knock.
3. 210HP, stock.
|
67871, RE: Stupid Question... Posted by RonanUK, Mar-29-04 03:44 AM
OK, thanks. How much bhp can the stock internals take? If I do a turbo upgrade, what will be the first thing to go pop?
Ronan
|
67874, RE: Stupid Question... Posted by JasonESi_T, Mar-29-04 04:20 AM
Originally posted by RonanUK OK, thanks. How much bhp can the stock internals take? If I do a turbo upgrade, what will be the first thing to go pop? Ronan
On a 95-99 turbo 4g63, usually 350 to 400hp is the rule of thumb.
The first thing to go pop is the crankshaft position sensor when the crankshaft grinds it way through the side of the block towards the tranny, due to machining errors in U.S. spec 7-bolt 4g63's, unfortunately found in all 95-99 stock turbo eclipses. Some may differ, but I would theorize that around at least 40% of all 95-up 4g63's, prior to at least 99, have this issue to some degree.
Good luck.
| |