Ok, today i installed an MP 60m throttle body. Install was fine and everything works, however my gas petal feels very light.. hence the spring on the thottle body is very weak. Is there anything that can be done to make it tighter? I tried putting on an extra spring, but can't find good placement since of the way the throttle body is designed.

Thanx
James

Maybe this isn't the answer you were looking for, but I had to hook up a return spring to mine.

Thats what I had to to mine....I have a huge return spring..pedal is nice.

yeah i tried to return spring, can't finda good place to monunt it..

Originally posted by siueclipse
yeah i tried to return spring, can't finda good place to monunt it..

Did you get the 1st edition or the new and improved one that has the adjustable spring on it?
The one i bought direct from them has the adjustable spring and I find that using it on the second setting seems to be best.
hmmm.

I just ordered one. If I need to add a return spring can anyone who has done this post pics.

i bought it used from a guy on here, so i have no idea what version it is.

james

ok, i just went to their site and see the adjustment for the new tb's.. im going to go check mine.

james

ok mine must be a 1st generation one.. there is no adjustment..

hey dirty, that looks like a good answer. ill have to fabricate something like that.
thanx

where'd you get this TB? what's the site. i might be interested

i bought it used, but its sold at www.modernperformance.com

Try putting the adjustable spring setup on the other notch. There are 2 different notches on the throttle body and you probably need to go the other notch and then adjust the throttle cable and you should be fine. I had the same problem and took all but 3 seconds to fix man. Hope that helps.

This is what I did.....

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=69267&mesg_id=69267&listing_type=search


-Jared