| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Fuel Press sending unit install w/ N2O |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=66115 |
66115, Fuel Press sending unit install w/ N2O
Posted by wickedtalon, Feb-28-04 11:36 AM
I'm planning on putting a Flo-Thru manifold at my test port for my sending unit. Has anyone else tried it? I wasnt sure if there was enough room for it. Do you think I need a 90 degree elbow on the end of the manifold before I add the line going to my fuel solinoid?
this is what the manifold looks like for those who doing know (minus the gauge):
http://store4.yimg.com/I/southwestautoworks2002sc_1779_16815103
|
66136, RE: Fuel Press sending unit install w/ N2O
Posted by eclipse_99rs, Feb-29-04 04:04 AM
Im confused as to what you are asking.
|
66155, RE: Fuel Press sending unit install w/ N2O
Posted by wickedtalon, Feb-29-04 09:54 AM
Im just trying to figure out the best way to hook up my fuel pressure sending unit along w/ my line going to my nitrous setup. Is it ok to put the sending unit at the end of the fuel rail? Anyone that has tapped their rail at the test port should be able to help me out.
|
66158, RE: Fuel Press sending unit install w/ N2O
Posted by wickedtalon, Feb-29-04 11:36 AM
well, I tried that manifold deal and there wasnt enough room to hook up the sending unit. I guess I just need a T fitting or whatnot.
|
66205, RE: Fuel Press sending unit install w/ N2O
Posted by eclipse_99rs, Mar-01-04 07:46 AM
try to find a T fitting i think aeroquipe makes them. Try summit earls performance plumbing part #
ear-982403 -3an
ear-982404 -4an
ear-982406 -6an
ear-982408 -8an
all are only $7.50
Those are the part numbers for the T fittings. There is no reason why you cant do it. On my boat we have gauges everywhere.
|