2GNT.com Forums - Printer friendly page, topic ID #65549 -

Go back to previous topic
Forum name	Turbo/Nitrous Tech
Topic subject	Fitting for the fuel filter.....
Topic URL	https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=65549
65549, Fitting for the fuel filter..... Posted by Nitrous_RS1997, Feb-19-04 04:50 PM I cant find the male thread-to-barb fitting anywhere around here. Anyone know the exact thread pitch, so maybe i can find somehwere online that has it? if not, ill have to cut a bolt and have a barb brazed onto it or something. Thanks. 1997 Silver RS Wiseco 8.8:1 Pistons(back to low compression!) Eagle Rods T3/T4 Turbo Custom FMIC Greddy Exhaust 390's Most current 1/8th mile time: 8.3@90mph 2.015 60'(Nitto Drag radials, i suck)
65555, RE: Fitting for the fuel filter..... Posted by Dave41079, Feb-19-04 07:05 PM Why do you need a male end to barb to go in there? I can't think of any reason for you too hook a hose up there.
65560, RE: Fitting for the fuel filter..... Posted by widebodied, Feb-20-04 12:22 AM Originally posted by Dave41079 Why do you need a male end to barb to go in there? I can't think of any reason for you too hook a hose up there. maybe for a aftermarket fuel filter :rolleyes i think the thread size is very odd. DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job 2000 Yamaha R-1, 165rwhp 117 ftlbs tq ALMOST THERE...... MUWHAHAHAHAHAHA Originally posted by Thunderous_Talon a man could build a thousand bridges, and suck one cock. he'll forever be known as a cocksucker.
65565, RE: Fitting for the fuel filter..... Posted by Dave41079, Feb-20-04 03:04 AM Originally posted by widebodied maybe for a aftermarket fuel filter :rolleyes i think the thread size is very odd. There is absolutely no need for an aftermarket fuel filter. OEM works just fine, and yes, that's WITH an SFMU and return line. I know Gorkoracing and I just installed one on his car that way. I posted how to do it on a thread a few days ago. Anthony, just hit me up on AIM sometime and I'll explain it a little better.
65609, RE: Fitting for the fuel filter..... Posted by Nitrous_RS1997, Feb-20-04 05:57 PM Im needing the fitting to re-use my factory fuel filter with the SFMU return line setup, on my 97+. I dont know of anyway else to do this, other than "making" a fitting. Your input is very welcome if there is another solution. 1997 Silver RS Wiseco 8.8:1 Pistons(back to low compression!) Eagle Rods T3/T4 Turbo Custom FMIC Greddy Exhaust 390's Most current 1/8th mile time: 8.3@90mph 2.015 60'(Nitto Drag radials, i suck)
65610, RE: Fitting for the fuel filter..... Posted by XtremeRS, Feb-20-04 06:00 PM HRC supplies the right fittings in their kits, may want to call them up and see what they can do. Its not a standard thread size?