| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Need a cheap but dependable boost controller... |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=65336 |
65336, Need a cheap but dependable boost controller...
Posted by EclipseRST, Feb-16-04 06:24 PM
That's right, I want cheap and dependable. Does such a boost controller exist?
I'm not looking for anything fancy like the electronic models. I just want a really cheap boost controller that I can manually set and leave alone. I'm upgrading from my current HRC stage 1 setup to a HRC SMIC but am keeping my current wastegate spring in and only boosting 5-6 psi. So I need something to up the boost a bit after the pressure drop through the IC.
I checked out MachV and the cheapest they had was a Hallman ES for $69.00. Anyone had any experience with this baby? Should I check out ebay?
|
65337, RE: Need a cheap but dependable boost controller...
Posted by SILVERNT, Feb-16-04 08:01 PM
http://www.geocities.com/chmwatson/FAQs/mbc/install_instructions.html
the DIY MBC, it works, and ittl cost you sround $10 to make
|
65347, RE: Need a cheap but dependable boost controller...
Posted by BoostedGS, Feb-17-04 02:21 AM
Hallman and Joe P are both good boost controllers. Reliable and fairly inexpensive.
|
65380, RE: Need a cheap but dependable boost controller...
Posted by MR BLUNT 2gnt, Feb-17-04 01:49 PM
http://www.dejontool.com/DSM-MBC.htm
check out he hi-lo dual controller. its great for wwd, you can switch from your wastegate setting when you have traction to whatever the boost controller is set at. i used this for a while before i got my hks evc-ez. its great, rock solid boost control. highly recommend it. and for the money its unbeatable.
|