Where can i get a tee so i can run my boost gauge and bov vacuum lines to it. i tries autozone and advanced and cannot find it there so i tried ace hardware and they dont have one either. I may be looking at the wrong size. The hose says 11/32 on it so i need to know where and what size tee i need.

If you are talking about the brake booster vac line, I used a plastic 1/4" tee, on 2 ends, and then the 3 part of the tee was small enough for a vac line for a boost gauge, or in my case, for my boost controller. I got it at Autozone. Its called a reducer tee I believe..Use small hose clamps on the tee also, you dont want it to leak vac from the brake booster. A brass Tee would probably be better to use though, but harder to find.

Thanks alot, i saw the 1/4 plastic tee, but wasnt sure, i appreciate the help. I will use that until i find a brass tee somewhere.