other than having the mount plate crooked....

whata ya think?

Looks nice man.

Looks hot, but not setup for external waste?

looks like the pacesetter turbo manifolds, and the cheesey manifolds ssautochrome sells on ebay.

most likly it will crack. the walls are too thin.

Look how far away from the head the turbo flange is.... looking ta it from the top.... looks way too close to the radiator if you ask me....

Yup, I don't think it'll clear the radiator/fans.

yep! it is the ssautochrome one on cheesebay...

looks like a header, chopped and flanged for a turbo. lol

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

Originally posted by Thunderous_Talon
a man could build a thousand bridges, and suck one cock. he'll forever be known as a cocksucker.

it's for a Neon and I'm not sure if it will even fit properly on a neon

Alain

check this one out, also found on ebizzle:


Now if i was to get this and a used T25 from an eclipse, that would make for a cheap custom turbo kit. Still would have to rig up the lines, intercooler, etc..

DUDE!!!
I just log on to post about the same manifold.
First: I like the concept, But
Second: It looks weak, also they are selling the sameone for the 4g63 guys, which this manifold is clearly made for.
so my verdic is NO WAY!

Originally posted by TalonSpeed
check this one out, also found on ebizzle: Now if i was to get this and a used T25 from an eclipse, that would make for a cheap custom turbo kit. Still would have to rig up the lines, intercooler, etc..

a T25 will not bolt to this manifold
also this manifold is made for an external wastegate
and by looking at the picture I could already see that you will have to modify this manifold to fit on an Eclipse


Alain

Originally posted by alain95i4

Originally posted by TalonSpeed check this one out, also found on ebizzle: Now if i was to get this and a used T25 from an eclipse, that would make for a cheap custom turbo kit. Still would have to rig up the lines, intercooler, etc..

a T25 will not bolt to this manifold also this manifold is made for an external wastegate and by looking at the picture I could already see that you will have to modify this manifold to fit on an Eclipse Alain

yes that flange is not for a T25, but the auction has the T25 flange option.

How would it have to be modified?



"Shut your mouth and open your eyes."

thermostat housing