| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Question about Oil inlet on the HRC 16g hole size in bottom |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=63754 |
|
63754, Question about Oil inlet on the HRC 16g hole size in bottom Posted by tim97rs, Jan-18-04 08:26 AM on my HRC 16g the hole that allows the oil to get to the shaft, at the bottom of the oil fitting inlet, is like sooper dooper tiny. its mabye only 1/16" or so big. does that seem right? anyone else have that size hole? | |
|
63760, RE: Question about Oil inlet on the HRC 16g hole size in bottom Posted by lonnie1977, Jan-18-04 11:23 AM My 16G is on the floor right now and it looks like a 3/8 npt thread for the oil inlet and a 1/2" outlet for the oil return. Are you looking at the hole in the fitting that the 90* attaches to?. That is a -4AN fitting and that is the appropiate(sp) size for the fitting. Hope this helps. | |
|
63768, RE: Question about Oil inlet on the HRC 16g hole size in bottom Posted by tim97rs, Jan-18-04 02:48 PM heres a pic. this is the inlet to the shaft. i noticed 2 holes on the sides as well as the one in the bottom. it just seems that that little hole is to small. is yours like that? | |
|
63799, RE: Question about Oil inlet on the HRC 16g hole size in bottom Posted by tim97rs, Jan-19-04 07:39 AM bizzle dizzump! | |
|
63820, RE: Question about Oil inlet on the HRC 16g hole size in bottom Posted by lonnie1977, Jan-19-04 01:18 PM Mine is in my friends garage. I will check tommrow and take a pic if I get time. | |
|
63823, RE: Question about Oil inlet on the HRC 16g hole size in bottom Posted by fly1, Jan-19-04 04:48 PM I got the S-20G, and it has the same size hole--it's like 1mm. | |
