| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Catch Can as X-mas gift. |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=62747 |
62747, Catch Can as X-mas gift.
Posted by gilee_8, Dec-26-03 06:45 PM
Sup guys.
I got my catch can today.
And I want to make sure of this.
Do I take off the PCV valve then connect a hose directly from value cover to the catch can?
I am planning to connect both openings from the value cover to the catch can, is that good?
Thanks alot guys!
Happy new year!
Gil
|
62749, RE: Catch Can as X-mas gift.
Posted by etx, Dec-26-03 07:19 PM
Nope, you need vacume for the pcv to work properly. Just connect it to the breather port on the left side of your valve cover. Don't remove the pcv, its a bad idea. The better your rings seal the more zoom zoom for you.
|
62761, RE: Catch Can as X-mas gift.
Posted by fly1, Dec-27-03 02:18 AM
Ditto.:-)
|
62791, RE: Catch Can as X-mas gift.
Posted by gilee_8, Dec-28-03 05:27 AM
OK, so I am kinda confused.
So I do this.
There are two holes on the Valve Cover.
THe one that use to have PCV valve is this:
valve cover - hose - PCV - hose - catch can
The other hole that use to have a breather filter is this:
valve cover - hose - catch can.
Am I correct?
THanks alot guys!
Gil
|