well.. on sunday im going back to the dyno. this time with a better wideband and datalogging setup. crane stage 2 cams, and an msd ignition and a fuel cell running the good stuff.

we also will be screwing with the cam gears... the only thing thats left is a 60mm tb. im still running the stock one. i think after that im going to be done. im not going to run piggy back or anything..

wish me luck.. 341whp will be a memory soon.

James

word ;) 60mm tb, port matched intake manifold with a port and polish and water injection you could push more boost and be well into the 400whp range ;) good luck man!
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

"drugs have taught an entire generation of american kids the metric system. "

already have port and polished head.. just need tb

thanx
:)

James

what do you have exhaust wise? 3 inch, no cats?
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

"drugs have taught an entire generation of american kids the metric system. "

3" no cat

www.aquamist.co.uk
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

"drugs have taught an entire generation of american kids the metric system. "

interesting

completely takes out detonation, cools the intake charge because of the vaporized mist. connects to a boost pressure switch that comes on at your set boost pressure. if i were slammin as much boost as you i'd definately get that. u can also hook it up to a knock box and have it spray when it sees knock, good investment imo. especially at 19-21psi. The heat of evaporation is 2256kJ/kg, approximately six times more than gasoline!

read this:
http://not2fast.wryday.com/thermo/water_injection/opt_mass.shtml
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

"drugs have taught an entire generation of american kids the metric system. "

Good luck. Wish i had your resources..

fyi.. i didn't go to the dyno.. as i was about to put the cams in, i realized i need lashers first.. DUH

still waiting...

james