listen i'm looking at two differnt tee's and neither one of them are the same coarse thread as the oil sender threads.... am i missing some thing? One has a plug in it and the other is twice the size....
Please help....... TIA

And the HRC directions suck!!!!!!!!!! someone needs to come up with a step by step with pics.............

Originally posted by icedout
And the HRC directions suck!!!!!!!!!! someone needs to come up with a step by step with pics.............

I couldn't disagree more.

Remember, he's not makiing these instructions for the afternoon hobbyist.

here's the website the kinda help me with the install. check out the oil section of the install pics.

http://www.fast420a.com/images/turbo/


this is the oil system, pretty self explanatory now that i look back on the install. the top gold thingy is the oil tee. based on the bottom pic, "buttom" part of the tee is the oil feed line, and the male female thread (that's on the opposite side of the male thread) is where the fuel pressure sensor goes. the part under the gold tee is the part that goes on "bottom" of the tee, then this connect to the oil feed line, which connects to the "L" fitting that goes on top of the turbo.



-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!

Originally posted by jsupetran
here's the website the kinda help me with the install. check out the oil section of the install pics. http://www.fast420a.com/images/turbo/ this is the oil system, pretty self explanatory now that i look back on the install. the top gold thingy is the oil tee. based on the bottom pic, "buttom" part of the tee is the oil feed line, and the male female thread (that's on the opposite side of the male thread) is where the fuel pressure sensor goes. the part under the gold tee is the part that goes on "bottom" of the tee, then this connect to the oil feed line, which connects to the "L" fitting that goes on top of the turbo. -------jezreel hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!

Ok from the pic above which part goes into the back of the block cause the sender is like 1/4 in coarse thread?

looking at this pic i took out the sender on the right did i take out something wrong....
thanks

to figure out the oil pressure sensor, it is teh sensor to the far left of teh engine block. it is colored bright green. if you took out the right sensor, then i think that's the knock sensor.

the tee side that goes to the back of the block is the side with the male thread, or the part where the screw thread is on the outside.

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!

Originally posted by JasonESi_T

Originally posted by icedout And the HRC directions suck!!!!!!!!!! someone needs to come up with a step by step with pics.............

I couldn't disagree more. Remember, he's not makiing these instructions for the afternoon hobbyist.

I'm not the afternoon hobbiest.... but come on i'v been able to rebuild 1400 ton chillers and the shit is easier to understand than these directions....... they just all over the place... that is why it needs a step by step for peole to read over to get a general knowledge.......
I honestly think working and rebuilding the 4G63 is easier...just MO though

Hey bill hahn i hope you read this cause your directions SUCK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown

the directions aren't the best, that's why we have 2gnt!:-)
-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!

bro if i could give you points agian i would....thanks:thumbsup :thumbsup :thumbsup :thumbsup :thumbsup

no problem, i was once a turbo noobie too.
-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!

i use to know this system really good but then i became a 4g63 guy and the 420a went out the door... started with the 90gsx and now with the evo... but i want to finish my 420a project.... it is all show so i have been taking my sweet time with it... too long if you ask me.... i will probably be asking you a few other ?'s...... i just have forgot how the 420a is and the setting for tuning.... but i will pick it up once i get this project finished....

I was 110% noob and I figured it out. Did you play with legos when you were a kid? ;)

Originally posted by etx
I was 110% noob and I figured it out. Did you play with legos when you were a kid? ;)

LMAO, that's comedy

Originally posted by icedout
Hey bill hahn i hope you read this cause your directions SUCK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown

No icedout, you're just a fucking idiot. Sorry. A monkey could do it in their sleep.

I do believe we call that^^^^^^ Dinowned!!!!!!

Originally posted by DarkOne

Originally posted by icedout Hey bill hahn i hope you read this cause your directions SUCK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown :thumbsdown

No icedout, you're just a fucking idiot. Sorry. A monkey could do it in their sleep.

i'm a fucking IDIOT your a fucking moron....... Bro i'v forgot more knowledge than you will ever know about everything in life...... just cause i don't go tweaking with the 420a everyday.... don't call me a fucking idiot.... i'll run circles around you with the 4g63 so STFU... Don't go abusing your BS admin privilages... You are still a nobody....
Go play with your monkey!!!!!!!!!!!
Another thing you have some set of balls you are suppose to set the example here but all you do is abuse your powers.....:bowdown :thumbsup :thumbsup :thumbsup all praise the dino god:rolleyes yeah OK