Sup guys.
My brand new SFMU just got here today from Vortech.
OK...plese let me make this clear again.

Now my new setup:
Walbro 255HP fuel pump
30lb Fuel Injectors
Vortech SFMU

I will be running at 5PSI.

What should my idle & Static fuel pressure should be?
Also what disk, ring, spring should I use.

Thanks alot!
GIl

EDIT: BTW, when I measure the ring, should I measure the inside, or outside diameter?
THanks.

You've been here long enough... why dont you do a search?

EDIT: I searched for 2 seconds and the first post I pulled up read
30lbers:
idleing at 24psi fuel pressure and 60psi fuel pressure at WOT at 5psi.



Nick
97RS

turbo8u> shut your SUCK
ZAO684: NIPPLE warning...maybe>?

Sup man.
I konw I know...and I did search...but all I find is either 30lb at 10PSI boost, stock injector with 5 PSI, with with FMU, etc..

But anyhow..>GREAT news.
I got myself a COMPLETE new fuel setup, new hoses, new 6-an fitting, new SFMU, new 30lb injectors..

And guys... I start my car today for about 20 second. LOL...haven't done the DOWNPIPE yet.

I tried...and I want to cry..so happy...it's at 30PSI with no vaccum on the SFMU...SO HAPPY..finally not 55PSI or 60PSI....OH MY GOD.... SO HAPPY!!!

OK ... now I hav eto make this clear.
as ^^^ said above.
24PSI at idle. and 60PSI at WOT (under 5PSI boost)

But how bout Static Pressure?

Also, last time I test drove it, my car goes to 4PSI. but I have a FMIC... is that mean I am boosting higher?

WHat I want to konw is, our engine stock can't go over 9PSI, so if I am going 4PSI now, am I still have 5 more to go? or do I look at the PSI before the intercooler?

THanks!
Gil

P.S. Can't wait, tomtoorw will be sunny, so I will weld my DP to my exhaust...and I AM FINALLY DONE!!!! COMPLETELY!

You are seeing 4psi because you get ~1 psi drop from a fmic.
You are really boosting 4psi. The Wastegate on the other hand thinks that you are boosting 5psi. This is becaues of the pressure loss of the fmic. If you re-route the wastegate vac line to the mani. This should solve the problem. Becuase your wastegate will not see the pressure drop from the fmic.

Sorry I cant help with the other questions.



Nick
97RS

turbo8u> shut your SUCK
ZAO684: NIPPLE warning...maybe>?

30 # injectors at 21 psi of fuel at idle. Static doesn't really matter, the disc chooses static if you set idle, or vise versa. Get a boost controller to compensate for that FMIC, and turn it up a little, or do what he said if 5 psi is enough for you. (it's not for me)


1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / More at http://home.insightbb.com/~mgalyan/
Mark Galyan - Indianapolis, Indiana

yeah....4 PSI is fine for me right now.
And I modified the wastegate to 4PSI...stock is 10PSI...so if I want, I just turn the screw and I can go up and down..and Minimun is 4PSI.

Anyway, I need to know about the tuning of the SMFU, coz I will drive my car TOMORROW!!! cAn't wait.... I just have to finish the DP tomorrow. (Weld it to the exhaust)

THANKS ALOT EVERYONE!
GIl

Hehe, don't expect much out of 4 psi.


1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / More at http://home.insightbb.com/~mgalyan/
Mark Galyan - Indianapolis, Indiana

Originally posted by Eclipse2NR
Hehe, don't expect much out of 4 psi. 1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / More at http://home.insightbb.com/~mgalyan/ Mark Galyan - Indianapolis, Indiana

exept for some neat-o noises. you should be fine at 6 psi.

THanks for backing me up! Etx.

Yes....after I finished the DP, and the fuel system, I will set it to 6PSI, or 7PSI.

So, can some people answer some of the questions above?
THanks.
GIl

Did we not already answer your questions?

1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / More at http://home.insightbb.com/~mgalyan/
Mark Galyan - Indianapolis, Indiana

Yea..most of my questions... but two more.....
what disk and ring should I use?
and for the ring size.....is it the outter diameter? or inner diameter?

THanks again.
Gil

Use the biggest SFMU disc. It does not use a ring. If you get stuttering in boost, you will need to set up a bleed valve.


1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / More at http://home.insightbb.com/~mgalyan/
Mark Galyan - Indianapolis, Indiana

Thnks alot..
I did thought about a bleed valve..
but can I just use the screw on the SFMU (at the bleed value) and adjust it from that screw???
Thanks.
GIl