I'm doing my rebuild on 8.8:1 compression and i wanted to go with 335cc fuel injectors with 6:1 on the fmu. i don't plan on going past 15psi. Will this set be fine?

can you hit 15 psi safely with those injectors? :shrug

i'm not sure, that's why i'm asking. i don't want to have to run a safc.

How about 38lbs. injectors with 6:1 in the FMU? With no SAFC!!!...please someone reply with opinions...

for 15lbs of boost, you will need 415cc injectors running the 8:1 disk.

James

"siueclipse"

Are you talking about the 335cc or the 38lbs. Which can I run without using SAFC and still idle fine?

as written by him "415cc".
you can use those or 440cc ones without using the SAFC.

re-read the post bud.

you dont need an afc for anything at 440cc or under in my opinion.. you run a little ruch at idle, but who cares.. its not worth spending 300 bux for a slight adjustment.

im over 300whp without using an afc.

james

415cc = ?lbs.

415cc = about 40# injectors, where 30# injectors are roughly 315cc.

1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / More at http://home.insightbb.com/~mgalyan/
Mark Galyan - Indianapolis, Indiana