can some1 post a pic of where they tapped there pan for this line i saw a pic. b4 and i just cant find it now and im about to drop the oil pan and tap it. also what oil should i use after goin turbo 5w30? and what plugs ngk brk7e11? what gapping? .35? or what. TIA

Mods:
CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit

Originally posted by python6586
can some1 post a pic of where they tapped there pan for this line i saw a pic. b4 and i just cant find it now and im about to drop the oil pan and tap it. also what oil should i use after goin turbo 5w30? and what plugs ngk brk7e11? what gapping? .35? or what. TIA

The oil drain fitting goes at the top of the oil pan. Its hard to explain exactly where we normally put it, i know someone here has a pic floating around of the oil pan with the fitting on it. 5W-30 is the best oil weight to use. Get the NGK BKR7E plugs, as they come gapped for what you need(around .035)

make sure you check the gap before you install the plugs.

Originally posted by tim97rs

There you go. As high on the pan as possible.

I would put it higher than that pic. You just dont want the drain to be blocked at all with oil from the pan. The HRC's fitting usually goes about 1" down from the lip of the pan, and 1" over from the 2nd to last bolt hole in the flange.

Thank you, i will be welding it on tomorrow


Mods:
CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit