Built my DP for my HRC kit this past weekend. I did all the cutting and fitting but, my girlfriends dad welded it for me. Came out pretty good. Here is what i paid for the materials.

3 2.5" 90* bends = $30ish
1 2.5" flex section = $35
1 o2 bung = $5
1 50' roll of exhaust wrap = $20ish

Pictures:

looks clean!!!

dang, you are getting all kinds of new toys. way to go!

nice!..could you make me one and sell it to me?

I can show you were i got my stuff and you can take it to a shop.

Flex section and o2:
http://www.4customexhaust.com/components.htm

90* bends and header wrap:
http://www.jcwhitney.com/webapp/wcs/stores/servlet/ProductDisplay?productId=1020&catalogId=10101&langId=-1&storeId=10101

http://www.jcwhitney.com/webapp/wcs/stores/servlet/ProductDisplay?productId=639&catalogId=10101&langId=-1&storeId=10101

cool! thanks

Stay tuned guys, i'll be fabricating some 2.5" two piece, turbo to cat downpipes very shortly. I'll be posting a thread in the annoucements section. Not really a group buy, but you can get on a list to get one...I'm in the process now of finding all the parts I will need in quantity..

Originally posted by XtremeRS
Stay tuned guys, i'll be fabricating some 2.5" two piece, turbo to cat downpipes very shortly. I'll be posting a thread in the annoucements section. Not really a group buy, but you can get on a list to get one...I'm in the process now of finding all the parts I will need in quantity..

Can I get one for my HYOA Turbo Kit? I'd like it in 3.75" because I heard that it was important to have a 3.75" downpipe on a car that makes 250 horsepower.

Originally posted by mototool

Originally posted by XtremeRS Stay tuned guys, i'll be fabricating some 2.5" two piece, turbo to cat downpipes very shortly. I'll be posting a thread in the annoucements section. Not really a group buy, but you can get on a list to get one...I'm in the process now of finding all the parts I will need in quantity..

Can I get one for my HYOA Turbo Kit? I'd like it in 3.75" because I heard that it was important to have a 3.75" downpipe on a car that makes 250 horsepower.

Well, you would need to be pushing about 1000 psi through a t-25 to really need a 3.75" :)

Originally posted by XtremeRS
Stay tuned guys, i'll be fabricating some 2.5" two piece, turbo to cat downpipes very shortly. I'll be posting a thread in the annoucements section. Not really a group buy, but you can get on a list to get one...I'm in the process now of finding all the parts I will need in quantity..

^^^ WOOO HOOOOO! sign me up!

mototool is teh l33t0r, he is pushing 2000 psi! go away tool. :rolleyes

Originally posted by etx
mototool is teh l33t0r, he is pushing 2000 psi! go away tool. :rolleyes

Yeah, 2000 psi.. out of my filthy brown asshole.

Sign me up for an eleventeen inch downpipe UltraXtremeUber2GrsNT or whatever your name is...

If you back out of your group buy-ish thing I will ridicule you until your momma comes home :thumbsup

Originally posted by mototool

Originally posted by etx mototool is teh l33t0r, he is pushing 2000 psi! go away tool. :rolleyes

Yeah, 2000 psi.. out of my filthy brown asshole. Sign me up for an eleventeen inch downpipe UltraXtremeUber2GrsNT or whatever your name is... If you back out of your group buy-ish thing I will ridicule you until your momma comes home :thumbsup

I believe it's time for you to leave. Your momma came home a long time ago, now leave.

Originally posted by DSMRoadster
I believe it's time for you to leave. Your momma came home a long time ago, now leave.

Oh, ouch. Hey, moderators, we're not allowed to attack other members, are we? You should repremand this person. Can't you see these vicious words have messed up my fragile mind? This is the most mean and cruel thing ever posted to 2gnt, quite possibly ever!

Oh no, the piercing pain and anguish I'm feeling right now from these words is making me faint... my eyes are blurry... the room is spinning. Mommy.

someone make a script that locks any posts that contain any white meat. seriously useless!

as far as the ACTUAL TOPIC, I think if you could make a dp as clean as run4cvr's, i think you'd do pretty well. i'll keep u in mind ;)

Lol, well hopefully people can trust me, and know that I put out a good product, and good service, and that I will never let this get out of hand like it was previously. I will have a special web page dedicated to all those who have orders, will update each and every ones order, so people will know exactly what is going on. I will make it perfectly clear of what you can expect of my product, and of me personally, and will have the few who have recieved this pipe to post up their thoughts and comments on it. Unfortuately, all I have to go by is my word, and the words of people who have done business with me. I've sold quite a few test pipes, and have not had one bad comment yet. I take very, very much pride in my work, and i'll let it be known exactly what you are getting, when you are getting it, and all that. I have fun doing this stuff, and at the same time, make a little bit of extra cash, and help the guys out who need the pipes. I'm not a big business, I dont have tons of capital to work with, but I am completly honest in what I do. Hopefully, that accounts for something. :) And no, I sure dont want mototool on my ass!!

matt, i saw the downpipe you made thura and it looked awesome! i can personally vouge for matt too, first class guy, works at a first class shop. literally haha. just look at your feedback matt :) if you think youre credibility is in question.

anyway, ill be first on your list of "eleventeen inch downpipe UltraXtremeUber2GrsNT " downpipes!

i understand about keeping everyone in the loop. as long as everyones updated as to whats goin on, a little wait for a good quality piece isnt a problem. especially if you are test fitting each pipe on your own car. if mine comes out at all as good as thuras ill be happy :) along with an UltraXtremeUber2GrsNT solid motor mount hehe.

I'll be in on one of your down pipes. I have one of the test pipes and they solidly made and fit perfect. Matt is a great guy to deal with.





98 GS
HRC Stage II
14.852@94.43
http://members.cardomain.com/lonnie1977

does matt do costume/weird/turbo related projects?

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler


:+ :) :-) x( :-( :( ;-) ;) :o :D }( ;( :P :9 :* :nono :rolleyes :wary :thumbsdown :thumbsup :7 :love :bowdown :shrug :cheers :puke

Originally posted by jsupetran
does matt do costume/weird/turbo related projects? -------jezreel

i really dont think matt is making turbo costumes this halloween :)

OooOo delicious downpipe. But makes you wish you got a star kit so you wouldn't have to fiddle with it. Then again the star pipe doesn't even fit well O_o . How come you didn't go for 3 inch?

Originally posted by HadesOmega
OooOo delicious downpipe. But makes you wish you got a star kit so you wouldn't have to fiddle with it. Then again the star pipe doesn't even fit well O_o . How come you didn't go for 3 inch?

Its already a very tight fit with 2.5". Now, if you dont have A/C, then there is much more room to play with. Oh and btw,sorry for the thread highjack! :)

3 inch would of been tough to fit with my my newbie skills at cutting and fabbing. I think i will be building a 3 inch cat-back next.

HAHA! This bump is strictly for 420AYE. :P

Hope you read all this and now don't have to worry about how to go about it when you do your setup. :P

WOO HOO! Thanks d00d! but yeah, i had read it b4.



*SNIFF* *SNIFF* <teary eyed emotion> Thanks for thinkin 'bout me bro!!!</end emotion>

Yeah I have a feeling most of my exhaust seeps out the flexible supermarket tailpiping that makes up 30% of my downpipe. Even better, the 02 sensor is after the flex section. So much for accurate Air/Fuel readings. Too bad I have don't have an HRC kit. Looks like I'll have to resort the the custom route. Anyone seen my downpipe on the car? Here, I'll attach a pic. :) Also note the crush bent intake pipe right off the compressor. I heard this is excellent for flow. Yeah... one day I'll have big long pieces of powdercoated mandral bent tig welded intake pipes. Just wait :)




1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / More at http://home.insightbb.com/~mgalyan/
Mark Galyan - Indianapolis, Indiana

"One must walk, before one runs"
WIKKI '03

i dont know about a 3.75', but i wouldnt mind a 3', to be 3inch all the way