| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | HEEEEEEELLLLPPPPPPP!!!!!!!! BOV Connections need quick answer |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=54107 |
54107, HEEEEEEELLLLPPPPPPP!!!!!!!! BOV Connections need quick answer
Posted by jsupetran, Aug-15-03 08:16 PM
here's the hrc diagram:
http://www.imagestation.com/mypictures/inbox/view.html?url=http://www.imagestation.com/picture/sraid74/p32fc8ae5e6da73e0eb78e1c7d9f6c0b0/fb6052e9.jpg.orig.jpg&caption=phto0042&id=4217393897
my question is at the three opening "tree" on the intake manifold (i think the technical name is the intake manifold plenum) the opening farthest to the left is where the bov wire should be connected to. what happens to the stock connection that's already connected to that when the car is stock? that area should be occupied with the bov connection so where does the stock connection go to.
-------jezreel
|
54108, RE: HEEEEEEELLLLPPPPPPP!!!!!!!! BOV Connections need quick answer
Posted by DarkOne, Aug-15-03 09:06 PM
Just use a vacuum tee and connect both.
|
54109, RE: HEEEEEEELLLLPPPPPPP!!!!!!!! BOV Connections need quick answer
Posted by juggalo, Aug-15-03 09:19 PM
|
54119, RE: HEEEEEEELLLLPPPPPPP!!!!!!!! BOV Connections need quick answer
Posted by jsupetran, Aug-16-03 07:51 AM
>
okay i am officially confused
the picture is from the hrc instructions and the what you don't see is the bov line.
the "tree branch" to the far left (opposite to the tree branch where the tees that connect to the boost gauge and the line that goes to the sfmu), is where the hrc instructions say to connect the bov line. but there is already a stock line there.
SOOO....... are you all saying IS IT OKAY to connect the bov line to the "tree branch" where the boost and sfmu line goes to and everything will be fine?"
thanks ya'll.... the turbo kit install is officially ON!!!!! again!~!!!!!!!!!!!!!
-------jezreel
|
54120, RE: HEEEEEEELLLLPPPPPPP!!!!!!!! BOV Connections need quick answer
Posted by thedawg, Aug-16-03 08:00 AM
Hey, actually, I run my BOV directly off the big (center of the 3) nipple on the intake manifold. I tee off the other 2 nipples a couple times each to run to everything else.
Definitely helps responsiveness!
Anyways, it doesn't matter which vacuum source or what order you tee in, just as long as they're all connected to vacuum one way or another. (PNOYMAHAL! hehe)
|
54121, RE: HEEEEEEELLLLPPPPPPP!!!!!!!! BOV Connections need quick answer
Posted by jsupetran, Aug-16-03 08:03 AM
>Hey, actually, I run my BOV directly off the big (center of
>the 3) nipple on the intake manifold. I tee off the other 2
>nipples a couple times each to run to everything else.
>
>Definitely helps responsiveness!
>
>Anyways, it doesn't matter which vacuum source or what order
>you tee in, just as long as they're all connected to vacuum
>one way or another. (PNOYMAHAL! hehe)
sweet
:)
-------jezreel
|