Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectMy NX kit came today have a question.
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=54007
54007, My NX kit came today have a question.
Posted by big_green, Aug-13-03 04:13 PM
I cannot find the testport for the fuel. I searched and found a pic of another members car but mine didnt have it at the end of the fuel rail. It's a 97 if that matters. Thanx in advance.
54009, RE: My NX kit came today have a question.
Posted by slodsm, Aug-13-03 04:49 PM
its on the passenger side end,points directly at the fender, take off the tire cap thing and use a schrader valve remover.
54019, RE: My NX kit came today have a question.
Posted by 99Silver1100, Aug-13-03 05:53 PM
here is a pic

http://members.aol.com/pballer18/testport.jp g

54032, RE: My NX kit came today have a question.
Posted by big_green, Aug-13-03 07:13 PM
I looked there its just a metal end nothing sticking out i can plug into. the closest thing i could find was this http://www.dsmtuners.com/gallery/showphoto.php?photo=22472&password=&sort=7&thecat=500
54035, RE: My NX kit came today have a question.
Posted by djtrickee, Aug-13-03 07:43 PM
No man, thats a vacuum line. Dont hook up to that. You need to be looking on the FUEL RAIL. it is attached directly to the intake manifold kind of underneath . If you look between the valve cover and the top of the intake manifold with a flash light you should be able to see the fuel rail and injectors there. It is definantly there, lol.

-Chris b.
54036, RE: My NX kit came today have a question.
Posted by KSeclipse, Aug-13-03 07:58 PM
99silver has the right one, i'll email you pics of my whole isntall if you want
54038, RE: My NX kit came today have a question.
Posted by big_green, Aug-13-03 08:20 PM
ok right here? So i have to drill a hole there?

http://www.dsmtuners.com/gallery/showphoto.php?photo=22473&password=&sort=7&thecat=500


if you could email those pic it would be helpfull:)

If you can send them to whyneedasn@yahoo.com

tahnks for the help
54039, RE: My NX kit came today have a question.
Posted by KSeclipse, Aug-13-03 08:51 PM
54047, RE: My NX kit came today have a question.
Posted by big_green, Aug-14-03 03:08 AM
Ok i found it, but its completley blocked, waht do i use to open it?

http://www.dsmtuners.com/gallery/showphoto.php?photo=22477&password=&sort=7&thecat=500
54049, RE: My NX kit came today have a question.
Posted by BoostedGS, Aug-14-03 04:15 AM
You'll need a valve stem puller from any local auto parts store.