Hey guys,

Finaly got most of my turbo stuff in the mail... while I'm waiting for my fuel rail and downpipe, I figured I'd make some turbo install "crib-sheets" to help the install go a bit easier. First thing that comes to mind are my fuel pressures. I got a set of 30# injectors sitting right here next to me, along with a SFMU. I have a package of 3 rings, and 3 discs, and a dark spring. I believe the wastegate on this T3 here is set to about 6 psi. So in everyone's experiances, what disc/ring combination turned out to be the best rising rate for the 30 pounders and 6-8 psi of boost? I didn't happen to get my instruction manual with my SFMU, and Vortech's site isn't working correctly at this moment, so all help would be appreciated. I found a thread on this exact setup a long time ago, but searching for an hour yielded nothing I can really use. I wonder if my new fuel rail will alter the pressures much...
Thanks in advance guys.



1996 Eclipse RS / 5-Speed / Body Components by Aerogear / Coated in Magnetic Red Metallic v2 - More at http://home.insightbb.com/~mgalyan/
Mark Galyan - Greenwood, Indiana