| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Cant get boost to increase |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=52858 |
52858, Cant get boost to increase
Posted by Eklypz420, Jul-28-03 12:42 PM
I just got my Greddy TVVC boost controller installed and I cant seem to get the boost to go up past 6 PSI. Either way I turn it, it wont increase. Any Ideas? Thanks
Jimi
|
52859, RE: Cant get boost to increase
Posted by DarkOne, Jul-28-03 01:11 PM
How about posting in the appropriate section?
|
52881, RE: Cant get boost to increase
Posted by MITSURACER, Jul-28-03 05:25 PM
this is the right section isnt it
|
52921, RE: Cant get boost to increase
Posted by DarkOne, Jul-29-03 05:49 AM
It is now that i moved it here. it wasn't posted here.
Make sure you've got a good vacuum source for the BOV. it if doesn't get a good signal, it won't work properly. You could also adjust the screw on the top a little softer to see if that makes a difference.
|
52961, RE: Cant get boost to increase
Posted by DarkOne, Jul-29-03 03:03 PM
>Make sure you've got a good vacuum source for the BOV. it if
>doesn't get a good signal, it won't work properly. You could
>also adjust the screw on the top a little softer to see if
>that makes a difference.
Whoops. That was meant for another thread i moved into this section.. disregard.
|
52960, RE: Cant get boost to increase
Posted by XtremeRS, Jul-29-03 03:00 PM
I'm not real familiar with that boost controller, but be sure its not hooked up backwards.. ie, boost side and wastegate side
|