Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectNew Accel injector question
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=51997
51997, New Accel injector question
Posted by Jesters Eclipse, Jul-12-03 04:37 PM
I just ordered new injectors from Hahn and I wanted to know if it came w/ all the hardware I need to install them the day they come in. Will I have to go out and get new O-ring and gaskets from Satan or do they come w/ everything I need? Thanks

52000, RE: New Accel injector question
Posted by XtremeRS, Jul-12-03 06:12 PM
The injects will come with new O rings. Thats really all there is to it. A pretty straight forward swap, plug and play.
52001, RE: New Accel injector question
Posted by Jesters Eclipse, Jul-12-03 06:48 PM
Cool, thanks.

52002, RE: New Accel injector question
Posted by JustOne, Jul-12-03 06:58 PM
>A pretty straight forward swap, plug and play.

Small correction, plug, tune and play.
52011, RE: New Accel injector question
Posted by thegame, Jul-13-03 01:17 AM
anyone gotta pic of where these are/go? not sure where theyre at. never really looked...



14.7 @ 93mph / 7psi 185hp/180tq
52012, RE: New Accel injector question
Posted by Jesters Eclipse, Jul-13-03 05:31 AM
>Small correction, plug, tune and play.

Thats why I wanted to make sure I didn't need anything else because they're coming in the day before I get dyno tuned and wanted to make sure I didnt need anything else.

52031, RE: New Accel injector question
Posted by XtremeRS, Jul-13-03 04:23 PM
>>Small correction, plug, tune and play.
>
Hehe, well yeah, i thought that was a given with larger injectors :) Just dont swap in larger injects and run stock fuel pressures. A SFMU will be your best bet if you are turbo..There, I clarified it a bit for ya.