| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | wastegate question need help!!!! |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=51107 |
|
51107, wastegate question need help!!!! Posted by hkillr, Jun-26-03 07:50 PM i have a garret t3 with the standard internal wategate. its being installed now. the maechanics took the wastegate actuator off to check it. they hooked it up to a pump and they said it would not move. is there something wrong with it or what, are you supposed to be able to push the rod in and out by hand. would it be all right to drive it this way? would it possibly break loose when the boost hits it?? i need help fast!!!!!! | |
|
51123, RE: wastegate question need help!!!! Posted by icedout, Jun-27-03 04:53 AM why the hell would you bring a turbo to someone that doesn't seem to know shit about turbo's..... taking it apart and hooking a pump to it.... that has to be a new one...... | |
|
51124, RE: wastegate question need help!!!! Posted by MetalJim, Jun-27-03 05:53 AM To test a wastegate you've got to hook it up to a compressor - one with a pressure regulator. Turn the regulator until it's closed - no pressure. Hook up the WG and very slowly increase the pressure on the regulator. The WG arm shouldn't move until it hits its cracking pressure(6 psi, 10 psi, whatever). As the pressure increases the WG arm should open more and more. Don't go too high over the cracking pressure - just go far enough so that you tell if it continues to open with increasing pressure(5 psi over or something like that). | |
|
51130, RE: wastegate question need help!!!! Posted by hkillr, Jun-27-03 07:19 AM iwould if there was someone around here that knew about turbos. i had everything worked out all they had to do was bolt the shit on and weld up the exhaust. i would hjave done it myself if i couldve done the exhaust. its just a stage one setup. they told me the wastegate was siezed. i was going to have to make it adjustable anyway, cant run but 5psi. the turbo is probabaly set around 10 or so. i already ordered me new wastegate last night, i was just wondering how i can safely drive until i get the new one? | |
|
51133, RE: wastegate question need help!!!! Posted by MetalJim, Jun-27-03 08:44 AM Oh, to drive it around just remove the wastegate actuator. Without an actuator you won't see boost. Don't leave the broken actuator installed. | |
|
51168, RE: wastegate question need help!!!! Posted by hkillr, Jun-27-03 08:49 PM thanks, thats what i needed to know | |
