| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Star Stage two (TURBO GUYs HELP plz) |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=50213 |
50213, Star Stage two (TURBO GUYs HELP plz) Posted by Snail_GS, Jun-10-03 02:16 AM
After four long hours shuwa,me and two of my other buddies are almost done installing a Star Stage two Kit on my 1999 MTX GS. everything is on but the oil return line & FPR which I have no Idea where Im going to put that thing cause I have cruise control and would like ot keep it. Could I replace my wind shield fuild tank and Place the FPR there?
BTW I want to thank shuwa, bobby, and Keith for coming over so late and helping me start on this project:thumbsup
|
50214, RE: Star Stage two (TURBO GUYs HELP plz) Posted by Justin99RS, Jun-10-03 03:11 AM
i mounted mine up by the ID sticker on the firewall--you can see it up there...but in retrospect, i should have mounted it back by the stock FPR like the instructions say too....

|
50215, RE: Star Stage two (TURBO GUYs HELP plz) Posted by mkerley, Jun-10-03 04:19 AM
If you're using the Vortech FPR that came w/ the kit, put it up under the car next to the stock regulator like the instructions say too. There was a post about a week ago or so that contained pics of someone else's mounted under there. It's tight, but it fits and it's the best location IMO.
|
50217, RE: Star Stage two (TURBO GUYs HELP plz) Posted by rfpunch, Jun-10-03 05:29 AM
seems to me it would be the same either place you mount it. if you mount it in the engine bay, you will have to run the long return line back to the tank, but a short line from the rail. and if its back near the tank, you will have a short return line, but a long feed line from the rail right? plus it is much easier to make adjustments if its in the engine bay
|
50225, RE: Star Stage two (TURBO GUYs HELP plz) Posted by mkerley, Jun-10-03 08:03 AM
Well, if he's running the vortech fmu on a 99, there is no return line, so he would be running a line all the way from the back up to the fmu, then all the way back to the tank. If you mount it near the stock regulator, you use two pieces of hose (one is ~6" long and the other is >2' long). Plus the fmu has no adjustability. The only option that makes any sense to me is in the back.
|
50234, RE: Star Stage two (TURBO GUYs HELP plz) Posted by MuRiX, Jun-10-03 09:59 AM
He is going to have to run a return line from the fuel rail either way no? I thought putting it near the fuel rail is still the best option.
Oh, for comparison, not having toyed with a Star setup, HRC requires slight relocation of the cruise control which is not too difficult.
Marietta eh? You guys really should meet up with Armond and his bunch on the south side. If you have not had a ride in his Avenger you really should. He just put in his new stage 5 cams. Having already made over 400fwhp, I am interested to see what it can do now.
|
50252, RE: Star Stage two (TURBO GUYs HELP plz) Posted by shuwa29, Jun-10-03 12:23 PM
the only time i've seen armonds car was the one day up at starbucks. and even then, i didn't know it was him until like a few months later. god that thing looked nice even back then. later
|
50256, RE: Star Stage two (TURBO GUYs HELP plz) Posted by MuRiX, Jun-10-03 12:33 PM
You know what. I was with him. I distinctly remember your car being parked up with the sf1 front bumper as I was considering it at the time and the was the first I had seen it.You had the yellow stripes down the side as well. I used to take my car up to the starbucks as well.
|
50265, RE: Star Stage two (TURBO GUYs HELP plz) Posted by shuwa29, Jun-10-03 01:27 PM
damn, i really wish i could have met you guys then. b/c it was only months later i talked to armond online about almost everything and i talked to you some points also. damn, well whenever you are back in town let us know. i leave september 2nd for air force bmt but i'm planning on being boosted in like a month or two since all the parts are now availible. later
|
50270, RE: Star Stage two (TURBO GUYs HELP plz) Posted by mkerley, Jun-10-03 02:38 PM
No. With the star, you don't have to run a return line. I think it's better if you do, but the parts aren't supplied and it works just fine w/o it.
|