| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Greddy Type S BOV - Question |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=49501 |
49501, Greddy Type S BOV - Question
Posted by esseclipse, May-26-03 05:55 AM
I have a 99 Eclipse with a HRC stage II with the 3000gt bov. I just bought a Greddy Type S....How do I hook it up....it has a spot for two hoses and the 3000gt bov only has one hose going to it.
|
49502, RE: Greddy Type S BOV - Question
Posted by siueclipse, May-26-03 06:14 AM
the top inlet is where you plug the vacum line to. the bottom one.. don't worry about it, just leave it open
James
|
49514, RE: Greddy Type S BOV - Question
Posted by Dirty, May-26-03 09:37 AM
Does it mount to the HRC pipe with no modifications?
|
49517, RE: Greddy Type S BOV - Question
Posted by siueclipse, May-26-03 09:44 AM
yup
you have a coupler that connects the two.
|
49611, RE: Greddy Type S BOV - Question
Posted by jamesman, May-28-03 07:04 AM
you "can" hook up the lower port to a boost only source for faster valve actuation, but you cannot run over 10~12 psi or it will leak. if you hook up the lower port the bov sounds mucho better.
lates
james
|