Okay so I got both of these kits in the mail, they look damn good. There seems to be a lot of fittings though. Can anyone point me in the right directions on exactly which rubber hoses are used with what fittings or where everything goes?

talk to motofool, his aim name is MisChiefMaker33, hes always willing to help

whats up whatcha need y0?

the large rubber hose is the drain hose and it attaches to the large flange with the gasket for the turbo,

and the -8an bulk head with locknut is for the oil pan


the other fittings go brass t from block to oil presure sender and then to the down sizer tot he braided line all the way to the 90* swivel in the turbo...

for fuel u have the 60" long hard line the 3' of 3/8 fuel hose for the replacement of the stock line from the tank to the hard line when u remove the stock regulatir and fuel tilter,

u have 6' of 5/16 for the line to the vortech unit and then to the hardline and from the hardline to the tank and the proper connections to connect the lines..

I was looking over the Oil line kit and trying to figure out where it goes on my 14b. The oil return fitting with the gasket is way too big to fit on the turbo. The bolt holes dont match up. The oil feed line fitting is way too small to fit on the 14b. It seems that everything was made for a larger turbo.

Is this oil kit for the t3? Do I need to buy extra adaptors for my 14b? The fuel kit looks perfect though :) Thanks.

neovb that is fora t3 thats the only oil line kit i have avalable email me and we can get this straightened out mang...

You got mail @ MotoFool@gottude.com