| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | static FP is set with vaccum line off SFMU??? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=48098 |
48098, static FP is set with vaccum line off SFMU???
Posted by tim97rs, May-04-03 06:15 AM
was i supposed to disconnect the vaccum line on my sfmu to set static FP?
also, i know the vaccum screw is useless for us, but what about the boost screw, how is that one tuned, under full boost, right?
thanks guys
tim
|
48108, RE: static FP is set with vaccum line off SFMU???
Posted by BoostedGS, May-04-03 08:17 AM
Correct, static FP is set with the vacuum line disconnected, and idle FP is set with the vacuum line connected.
The boost screw allows you to fine tune the max fuel pressure under boost, I think.
|
48111, RE: static FP is set with vaccum line off SFMU???
Posted by 97eclipseRS, May-04-03 10:24 AM
yeah, you shouldn't have to touch the idle, or boost screw. just set the static w/ the engine on and vac line off the sfmu, then everything should be fine.
| |