Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectGauges questions?
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=4712
4712, Gauges questions?
Posted by guest, May-07-01 11:28 AM
I want to put in the order for my gauges tonight. I am getting an air/fuel gauge and a boost gauge. I want the autometer ones that are white with the silver ring around them. Are all boost gauges mechanical? Are they easy to install? I was wondering how you get the wires down the side of the dash. Also I have a question on the EGT gauge. Do I really need one with a stage one turbo kit?

DAVE_FL
97GS
AEM CAI
AFX PULLEY
AFX solid motor mount
Magnaflow exhaust
Sparkco 9mm wires
Eibach Pro Kit
tokico shocks
Altezzas
A Badass sound system
Indiglows,neons,and all that good stuff...hehe
looks mean doesn't it?


4713, RE: Gauges questions?
Posted by Corbin, May-07-01 12:16 PM
LAST EDITED ON 07-May-01 AT 05:20 PM (PST)

There are mechanical and electronic boost gages. I'm not sure if Autometer sells an electronic boost gage. I prefer an electronic one, but they cost more of course. I would still get an EGT with a stage one kit. You can still get into trouble with only 5 psi boost (if something goes wrong). I wouldn't feel safe without it. Also, what kind of A/F gage are you getting. If its a 10 segment blinky light one, save your money. They aren't worth much for tuning. The 30 segment ones are better, but not great. The digital numeric ones are much more useful. Heres a link: http://members.nbci.com/cbehnken/dvm.html


Corbin
'95 ESI-T
HRC + FMIC
http://members.nbci.com/cbehnken/


4714, RE: Gauges questions?
Posted by cyan, May-07-01 12:26 PM
autometer doesnt make white faced gauges with silver bezels. the white faced gauges (phantom) have black bezels and the silver bezeled gauges (sport/pro-comp) have matching silver faces.

http://www.geocities.com/blue2gnt


4715, RE: Gauges questions?
Posted by guest, May-07-01 12:49 PM
Yes they do.....the ultra lights

DAVE_FL
97GS
AEM CAI
AFX PULLEY
AFX solid motor mount
Magnaflow exhaust
Sparkco 9mm wires
Eibach Pro Kit
tokico shocks
Altezzas
A Badass sound system
Indiglows,neons,and all that good stuff...hehe
looks mean doesn't it?


4716, RE: Gauges questions?
Posted by sleepereclipse, May-07-01 01:38 PM
Don't get a the autometer probe. I dont know what the board feels about it but i have heard nothing but bad things about this from the 4g63 dudes. I got the greddy 60mm peak warning guage and it is worth every painstaking dollar. the guy had to literally rip the 150 + 100 for probe out of my hand but im glad because it has so many nice features. The main thing is the probe, make sure it isnt crap. Board?
4717, RE: Gauges questions?
Posted by Stan2gnt, May-07-01 02:35 PM
The Ultralite is SUPPOSE to be silver face with silver bezel but of course its really white face with silver bezel. The autometer is a 20 segment meter so it reads at .05V so .085v, .090, .095, .1 which is somewhat useful (anything less would really be useless. with this at least you can tell if your safe at WOT). Its what I have. The mech boost gauge is easy to install but autmeter install parts suck. I got the Extreme MS boost gauge install kit so I could run some real vacuum line instead of the junk it comes with (pinch it and its no good. hard plastic). If you dont get the install kit you'll need to find a fitting to run real vacuum line.


Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user



4718, RE: Gauges questions?
Posted by RS_Guy, May-07-01 03:15 PM
Here's some part numbers...

Autometer 2-1/16" Ultra-Lite Boost Pressure Gauge
(-30/+30 psi)
Part Number: 4303

Autometer 2-1/16" Ultra-Lite Single Channel Exhaust Gas Temperature Gauge
(0°-1600°F)
Part Number: 4365

Autometer 2-1/16" Ultra-Lite Oil Temperature Gauge
(140°-300°F)
Part Number: 4348

Autometer 2-1/16" Triple Gauge Pillar (Complete A-Pillar Cover)
1995-1999 Eclipse/Talon, Gray
Part Number: 22615

Autometer Blue Light Boots
Part Number: 3207

Westach EGT Sender (Clamp Type)
48" Type K Thermocouple
2.5 Ohms Res., 0°-2100°F, 32.9mV @ 1500°F
Part Number: 712-2DWK

Guy
RS_Guy



Damn the waiting..... It Sucks! 6.5 months counting...
GTuned.com is Basically Ready!!!
4719, RE: Gauges questions?
Posted by cyan, May-07-01 03:27 PM
well kick me in the head and call me a bitch, i got special edition gauges i guess cause all 9 of my gauges are Autometers and all 7 of the ultra-lites are SILVER FACED with silver bezels. i rest my case.

http://www.geocities.com/blue2gnt


4720, RE: Gauges questions?
Posted by RS_Guy, May-07-01 03:41 PM
(kick) - bitch! :-) Just kidding....

The Ultra-Lite LOOKS white, but they are silver... Its a common misconception... come on guys.. relax ... it's a minor detail...

Let's play around and quote Autometer:

"The silver dial was added to make this series easy to read under harsh racing"

Source:
http://www.autometer.com/hp/2001_catalog/buyers_guide/buyers_guide.html


Guy
RS_Guy



Damn the waiting..... It Sucks! 6.5 months counting...
GTuned.com is Basically Ready!!!
4721, RE: Gauges questions?
Posted by cyan, May-07-01 05:21 PM
agreed, so its settled. hehe, what was the original question again?

http://www.geocities.com/blue2gnt


4722, RE: Gauges questions?
Posted by guest, May-08-01 12:00 PM
You are correct. I got a air/fuel gauge and it is silver. It just always looked white in other peoples cars.

DAVE_FL
97GS
AEM CAI
AFX PULLEY
AFX solid motor mount
Magnaflow exhaust
Sparkco 9mm wires
Eibach Pro Kit
tokico shocks
Altezzas
A Badass sound system
Indiglows,neons,and all that good stuff...hehe
looks mean doesn't it?


4723, RE: Gauges questions?
Posted by Stan2gnt, May-09-01 12:56 AM
Yeah you can barely tell they're silver unless you already know its suppose to be silver or someone tells you to look at them closely but they're silver (barely). I guess they should make a titanium series that is more silver. Damn I also forgot the original question. Hope it was answered.


Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user



4724, RE: Gauges questions?
Posted by Armond30, May-08-01 04:18 PM
hehehehehehe. that's hilarious hehehe.

Bring it on............