i was wondering who makes ss swirl valves besides SI Industry? they are out of stock on standard size valves and wont have it in for a while. if you guys could let me know the company name and part # price etc of how i can get some of these valves? ... and if i should say its the same as the neon etc?
thanks
Michael 99gs
HRC Stage 2 @12psi :D
Stage 3 process begins gathering parts for rebuild
2GNT Member #32

http://www.dreamwater.net/purplebeast

The valves are the same as for the neon. As for where to get them, I only know of howell they might have some in stock.

SI sucks. Buy Ferrea.

"SI sucks. Buy Ferrea"

dame.. i called si and i can get it for $10.50 each, and i called the machine shop ( i will use ) for the Ferrea valves and they are $24 each gosh dame it.. thats a grip of difference.. one thing, when i called the machine shop i told him to look under dodge neon, and i told him dohc etc then he said, your right they make them, i asked the year of it for the neon and he said.. 94-99??? i thought it is 95-99 that are the same?
dino, where did you get your valves from, how much etc? any part #S
thanks
Michael 99gs
HRC Stage 2 @12psi :D
Stage 3 process begins gathering parts for rebuild
2GNT Member #32

http://www.dreamwater.net/purplebeast

Check with manley The make a severe duty valve that is strong as hell. Im sure they will have something.

got a website or # to call for that company?

Michael 99gs
HRC Stage 2 @12psi :D
Stage 3 process begins gathering parts for rebuild
2GNT Member #32

http://www.dreamwater.net/purplebeast

I got mine through ARD. it was about $250-280 for the set of 16.

There is a reason the SI valves are so much cheaper. Think about it.

i guess its more expensive because it sopose to be better hehe... but i need to find these Ferrea valves cheaper then 380 hehe.. i guess ill try to give ard a call and see.. would i just say its for a dodge neon dohc 94-99 if they cant find it under the eclipse section? and who should i speak with at ard?
thanks
Michael 99gs
HRC Stage 2 @12psi :D
Stage 3 process begins gathering parts for rebuild
2GNT Member #32

http://www.dreamwater.net/purplebeast

You'll prolly get Jody (sorry if I spelled that wrong) He will know what you want, they are some sharp guy's out at ARD.

Mike, the DOHC Neon was initially released as a 1996 model, but it actually began assembly in 1994. Many companies vary the way that they denote when production of a vehicle begins. Some, like the machine shop that you spoke of choose to denote the year that they began production as. Others choose the year when the automobile dealer releases it. Therefore, companies will say 94-99 DOHC Neon or 95-99 DOHC Neon. As long as you say the DOHC Neon aroudn those years, you should be cool. For similarity, many argue about the 1G DSMs. They were released as a 1990 model, but they began production of some of the 1990 models in 1989. Therefore, you see people list the 1Gs as 89-94, and others list it as 90-94.

Manley is an old-school muscle-car company. I do not know if they make 420a parts even though they may. Here is their site:
http://www.manleyperformance.com/

manley doesn't make 420a produts they have some honda stuff...
ive got their dealer catlog right here ...


id recomend ferra valves also real good stuff,

ferra should be close to 17$ per valve... that what it was last time i checked at the local engine shop...

Slight addendum to your Neon history:

'94 first production year only motor available was the SOHC.
'95 first year for the DOHC=our beloved 420A. (I own a '95 Sport with the DOHC)
Up through '99, after which the DOHC was dropped for only SOHC motors.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC