Go back to previous topic | Forum name | Turbo/Nitrous Tech | Topic subject | socket for unbolting stock oil pressure sensore? | Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=457 |
457, socket for unbolting stock oil pressure sensore? Posted by 95ESi, Dec-31-69 06:00 PM
l e o n
|
458, RE: socket for unbolting stock oil pressure sensore? Posted by MWC, Dec-31-69 06:00 PM
The only one I found to work was a 1.1/16 deep impact socket. I took a brand new sensor to the local home depot, and tried all and every socket until I found one that would work. Others cam close but I felt did not grab enough of the sensor to break lose. This one fits over the whole thing and was a sinch to turn with a 3/8 drive. I did need to use a 1/2 to 3/8 reducer because the 1/2 driver is WAY to big, to fit in that tight spot. GOOD LUCK! SEE YA!!!!!!!!!!MWC
|
459, i got one at autozone for $6 Posted by DarkOne, Dec-31-69 06:00 PM
I fought with that damn thing for hours on xmas day. Two twists with that socket, and it came out in my hand.
-DarkOne I'm so bad, i should be in detention.
| |