| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | socal turbo people i need help!.... |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=45116 |
|
45116, socal turbo people i need help!.... Posted by mitsuman, Mar-20-03 10:32 AM can any body please help me out with a 99 fuel system. im not to familiar with it being i had a 95. im installing a sfmu on a friends car which i sold my hrc stg 2 too. dan? kaiser? thanks guys, l8r | |
|
45129, RE: socal turbo people i need help!.... Posted by pn0ymahal, Mar-20-03 02:38 PM dude. just make sure on his fuel rail the valve is removed, the run a line from there to the 'IN' on the super -fmu and a gauge if you got that also. and on the out on the super fmu run that to the tank (return line).. and if his using stock injecs make sure within the fmu is the dark colored short spring and try the biggest disk 1st, if the rise rate is too much try the next smaller disk/ring etc. set idle fp to 47-55psi.. | |
|
45151, RE: socal turbo people i need help!.... Posted by eclipsekaiser, Mar-20-03 08:06 PM mike pretty much summed it up. the side port is the "In" while the bottom is the fuel drain that goes to the return line. Pretty simple. | |
|
45163, RE: socal turbo people i need help!.... Posted by jamesman, Mar-21-03 04:50 AM okay, for a 99 there are several differences from the 95. first the fuel filter and stock fuel pressure regulator are in the back of the car. you will have to have a special fitting for the fuel filter so it can attach to the hrc fuel pump and you will have to remove the stock fuel pressure regulator completely. then from the hrc fuel line to the stock hardline it is basically the same. you then have to connect the the test port on the fuel rail (remember to remove the valve core) to the in on the sfmu from the sfmu you have to connect the out to either an installed hardline or a long rubber hose and run that all the way back to the tank return port on the fuel pump housing. there are a few special fittings you will need for the 96-99 vehicles over the 95 fuel system. it will be difficult to install the system without these fittings. | |
|
45178, RE: socal turbo people i need help!.... Posted by mitsuman, Mar-21-03 08:10 AM thanks james and all for your help. ill attempt the install again. is it ok to run the walbro intank fuel pump or does he need the inline? | |
|
45180, RE: socal turbo people i need help!.... Posted by pn0ymahal, Mar-21-03 10:35 AM run the inline man... | |
