Here's everything I've collected over the last few months for a custom stage 3 turbo system. Now I'm ready to install it! My total cost was $2200. It's been fun choosing parts but it's very tedious and time consuming. All in all I'm very satisfied with my parts and wouldn't choose any of the manufactered kits over it.

NGK BRK7E-11 Plugs
Valve Cover Breather Filter
Oil Catch Can
Autometer Phantom A/F Gauge ATM-5775
Autometer Phantom Oil Pressure Gauge ATM-5757
Autometer Phantom Transmission Temperature Gauge ATM-5727
Autometer Phantom Pyrometer EGT Gauge 5744
Autometer Phantom Boost Gauge ATM-5703
Autometer Phantom Fuel Pressure Gauge 2-5/8" ATM-5812
Autometer Gauge Cup, Black 2-5/8"
Garrett T3 Turbocharger - .48/.42, NEW
Custom Turbo Manifold
Oil Line Kit
Vortech S-FMU Fuel Pressure Riser w/ all disks & both springs
INTAKE FILTER & pipe
Missing Link Check Valve for MAP sensor
Holley 255lph HP fuel pump
1g BOV crushed
1g BOV adapter flange
Manual Boost Controller
Starion Front Mount Intercooler
INTERCOOLER PIPING/COUPLERS
DSM 450cc Fuel Injectors
SS Braided -6AN Fuel System
CUSTOM 2.5" DOWNPIPE

I know people like to see lists for a custom setup, so there ya go! :thumbsup

looks good :thumbsup .........but for stage 3 you need upgraded internals, unless you already have and i didnt see it. also how are you planning on running those dsm injectors?

you can run the 4g63 injectors if you wire in the resistor pack off a 4g63

Yeah, and I have a pretty built motor. It should handle whatever I throw at it!

Nice :thumbsup


95 Eclipse RS : 5 speed
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

Whered u get the intercooler pipes and the downpipe? Were they custom made or did you buy them somewhere?

Good luck on the turbo kit, let us know how it goes :)

IC pipes came from JCWhitney.com. Couplers from Thermalflex.com. My downpipe and full 2.5" were fabicated at Ray's Custom Exhaust in Smyrna TN. It's a full turbo-back straight back pipe.

Would you know by chance which pipes you had to buy from JC Whitney? Ive been trying to look at them online and havent had too much sucess. I cant really find anything local around here to make me a downpipe, do you think the place you got yours at could replicate yours for a price? What exhaust manifold are you using?

>Would you know by chance which pipes you had to buy from JC
>Whitney? Ive been trying to look at them online and havent had
>too much sucess.

They are called "madrel bends". They are aluminum and are in the exhaust section on their site.

>I cant really find anything local around here
>to make me a downpipe, do you think the place you got yours at
>could replicate yours for a price?

Mine's custom. You'll need to find a shop that can fabricate it while the turbo is installed so it'll fit right. Call some performance shops in your area and ask them who does good custom exhaust work.

>What exhaust manifold are
>you using?

It's custom made by Got Tude Automotive (motofool).

Looks good Dougie!

Im having downpipes for my turbo kit made in 2 weeks..
neovb if your still looking for one..

next post is dyno numbers right ? =)

Bill

YES!!! I am absolutely interested in your downpipe. Ill pick it up along with the exhaust manifold when you make them, just let me know. Ill need it to bolt upto a stock 1g o2 housing.

TIGHT good job on that.. I wish i could do that but i dont have enough brains for all that...who is going to intall it?? do you think i i bought the same stuff you did a shop would install it???? thx

I'm installing it ofcoarse!