Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectWet kit install
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=43671
43671, Wet kit install
Posted by greenenvy95, Jul-17-01 01:05 AM
My girlfriend just got a 98 Eclipse NT. I have a secone NOs bottle and silonoids that i was going to use for a Stage 2. But now I am going to install it on her car. I want to know if their fuel rail has a service port like my 95 does? If not where is everyone getting the fuel from? Please let me know. Also has anyone run a second fuel line from the tank just for NOS. I am trying put my NOS back after my turbo install. I dont want to pull off the fuel rail. Any info that you can give me would be greatly appreciated.

95 Eclipse GS
Hahn Stage 2 turbo kit
Crane Turbo Billet Cams
JE Pistons & Crower Rods
440 Injectors
Apexi Super AFC
Crane Hi6 Ignition /w Timing retard
Greddy Exhaust
*Soon 100 shot NOS


43672, RE: Wet kit install
Posted by 55shot98, Jul-17-01 08:43 AM
I installed a NOS wet kit on my 98 RS there is a test port on the end of the fuel rail. Just take out the shrader valve and use that.
43673, RE: Wet kit install
Posted by slowGS, Jul-17-01 09:07 AM
just a ?,, was that a dry kit u had on your 95?, cause if so, u cant run i on your gf's 98

-aem cold air intake (painted black)
-hotshot headers
-afx bored tb
-afx ud pulley
-magnecore wires, ngk plugs
-front, rear strut bars
-eibach sportlines
-ingalls camber kit
-b&m short shifter
-tanabe g power catback
-hks ignition
-walboro fuel pump
-autometer guages
-17" black nippon racing evo's
-205/45/17 yok paradas
-N.O.S wet kit 50 shot (4 now)
-N.O.S purge kit
-blitz front end
43674, RE: Wet kit install
Posted by speedracer21, Jul-17-01 11:16 AM
you can also "T" into the fuel line. It's right below and to the left of the washer fluid resevor. Thats how I did it on my 99 gs.

Star Stage II (BB)
HKS Type-1 BOV
HKS T-Timer
Turbo XS MBC
Apexi-N1 Catback
Test pipe
Autometer Boost Gauge
Autometer A/F Gauge
Autometer Monster tack
Altezza stlye lights

Comming Soon...
CFDF Clutch
Full body graphics


"Thats not an FMIC, it's um... my alum radiator"



43675, RE: Wet kit install
Posted by greenenvy95, Jul-17-01 10:45 PM
Thanks for the info Guys. Both kits I have are wet kits. I hope to have my engine back in my car by next week. i want tofinally take it to the track and see what it can do. Will post some dyno numbers and track times. I have a G-tech pro so i will see next week.