| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | exauhst size? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=43655 |
43655, exauhst size?
Posted by tarascan79, Jul-18-01 05:08 PM
I ordered my wet nos system today and muffler and i was wondering what size piping i would need to get it welded on to(Muffler). I plan on getting a turbo kit next so keep that in mind. Would a test pipe be a bad idea? I plan on runing the 65 shot.All i have is a cai and 8.5mm wires. Also what kind of plugs should i get? Thanks for the help
|
43656, RE: exauhst size?
Posted by Stan2gnt, Jul-18-01 07:20 PM
2.5" would be ideal. You wont need to change it once turbo. Test pipe is a bad idea for legality. Get a highflow cat instead. I use the Extreme Motorsport 2.5" cat but the muffler shop will have to cut off and reweld the flange at a different angle (easy modification for them. didn't even charge me extra).
Since I cant use photopoint IMAGINE THIS:
Star turbo with E-trim and HKS BOV
Starion FMIC/2.5" piping
Joe P MBC
Apexi SuperAFC
Ross Pistons/total seal rings
Ported and matched intake manifold
AFX 55mm TB, FMM and UDP
2.5" downpipe back exh/Hayame muffler
Crane wires/Denso Iridium plugs
Centerforce DF clutch
KYB AGX struts/ST springs, UPR FSB, F&R camber kits
17" ADR lightnings/toyo FZ4 215/45/17
97' eclipse front end/projectors
Autometer gauges
Panasonic head unit/ Sony X-over
MB Quarts all around/JL stealth sub
Hifonics/MTX Thunder amps
XX brand alarm/Varad hyper green led
Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user
|
43657, RE: exauhst size?
Posted by mitseclps, Jul-18-01 11:35 PM
anyone know what size the greddy sp cat back is?
aem cai
greddy 4-1 headers
highflow cat
greddy sp cat-back exhaust
nx nitrous system 5o shot
purge kit
engine wireloom (5 hp rite there)
spring performance 2" lowering springs
autometer carbon fiber gauges
(a/f ratio, nitro press, oil press)
|
43658, RE: exauhst size?
Posted by Stan2gnt, Jul-20-01 10:05 PM
The non turbo version is 50mm. the GST version is 60mm.
Since I cant use photopoint IMAGINE THIS:
Star turbo with E-trim and HKS BOV
Starion FMIC/2.5" piping
Joe P MBC
Apexi SuperAFC
Ross Pistons/total seal rings
Ported and matched intake manifold
AFX 55mm TB, FMM and UDP
2.5" downpipe back exh/Hayame muffler
Crane wires/Denso Iridium plugs
Centerforce DF clutch
KYB AGX struts/ST springs, UPR FSB, F&R camber kits
17" ADR lightnings/toyo FZ4 215/45/17
97' eclipse front end/projectors
Autometer gauges
Panasonic head unit/ Sony X-over
MB Quarts all around/JL stealth sub
Hifonics/MTX Thunder amps
XX brand alarm/Varad hyper green led
Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user
| |