LAST EDITED ON 24-Oct-01 AT 07:09 AM (PST)

I'm about to place an order w/ Holley Performance. What are the extra parts besides the kit if I want to run a button setup? Thanks.
One more thing, does the wet NOS hook up to my intake, or do I have to tap into my fuel?

If you dont use your horn just diconect it and run your silnoid directly off it (It is under the left side of the front bumper and just unplugs and it works off the cars relay so you dont have to fart around w/ wiring that up and run a switch in the car easy as pie.

The fogger is installed in your intake pipe. You will also have to tap your fuel to plumb the fuel silenoid.

Christian
99 GS Anniversary Edition


http://www.ichibanracing.com/

I run a simple button setup on my car. It is mounted in the steering wheel. It is very easy actually. Simply purchase the button you wish to use (I used the corded button from NOS) and wire that in place of the throttle position micro switch. That way you have an arming switch, and the button when you want to go.

1994 Hon-duh AccLude GSR Si Sedan on that silly stuff.

cool, thanks for your help guys.