| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Help: what wire is the map sensor wire please? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=4301 |
|
4301, Help: what wire is the map sensor wire please? Posted by sleepereclipse, Apr-25-01 04:49 PM ??? | |
|
4302, RE: Help: what wire is the map sensor wire please? Posted by Tommyboy, Apr-25-01 05:32 PM LAST EDITED ON 25-Apr-01 AT 10:33 PM (PST) | |
|
4303, RE: Help: what wire is the map sensor wire please? Posted by sleepereclipse, Apr-26-01 01:56 AM i looked everywhere for that and couldnt find it. Could you send a pic of it? This is killin me because im the only one that seems to have this problem. hehe | |
|
4304, RE: Help: what wire is the map sensor wire please? Posted by Tommyboy, Apr-26-01 05:58 AM look at the end of your intake manifold on the passenger side there is a plug going into that manifold check the wires the yellow and black is the map sensor wire there are acutually 3 wires I think there just gotta look | |
|
4305, RE: Help: what wire is the map sensor wire please? Posted by sleepereclipse, Apr-26-01 06:08 AM That is the same wire that goes to the ecu. It is yellow with a black stripe correct? It goes to the 36 pin. I tried using that wire and i made sure that the green wire from the fcd went into the wire that lead to the ecu. I then put the white wire from the fcd into the end that lead to the o2 sensor which is at the end of the fuel rail. These were the directions that were givin to me by Wyatt. I must have the wrong wire or im a big jackass. Please help! | |
|
4306, RE: Help: what wire is the map sensor wire please? Posted by sleepereclipse, Apr-26-01 09:35 PM Wasnt m problem. Used the wrong wire for juice. Doh! | |
)