Anyone no any info on these? like how much more power do they add with nitrous and with out? And can they be tamed with cam gears to pass emissions?? Are they hard to install?
thanks to any who can shed some light on these cams...

>Anyone no any info on these? like how much more power do
>they add with nitrous and with out? And can they be tamed
>with cam gears to pass emissions?? Are they hard to install?
>thanks to any who can shed some light on these cams...

Cams are not fun to play with and I beleive the nitrous grind cams will hurt you when your not spraying. Are they hard to install? depends on you.. overall I think there a pain in the ass altogether.

>
>Cams are not fun to play with

I don't know whose cams you've been playing with but I am pretty happy with mine. Cams will REALLY change the power that we can make. They will have more power in the top end and you will pull pretty hard to the redline.



>and I beleive the nitrous
>grind cams will hurt you when your not spraying.



Actually they are a better grind than the street grind but they aren't as wild as the drag grind.



Just do them when you do your timing belt. You CAN swap cams without removing the timing belt but it was a pain to do and when I change cams again I will be removing the timing belt and doing them the right way.


________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Fast420A
How can you change the cams without taking off the timing belt? You have to take the cam gear off to pull the cams out don't you.

How long do you think it would take to change cams along with upgrading to PT parts in the process?

>How can you change the cams without taking off the timing
>belt?

I won't do it this way again but you can leave the gears inplace and loosen and remove the cams without removing the gears. It was a pain in the ass but it IS possible.


>How long do you think it would take to change cams along
>with upgrading to PT parts in the process?

Leaving the belt on and changing cams is at least a few hours. You reallly save no time. I just wasn't planning on changing the other timing belt items when I got my cams.

As far as PT rockers and lifters, I can change those in an hour with out removing the cams. It's a quick, simple process.


________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

I thought the rockers and lifters were under the cams? Well they are a little offset

Yup they are under the cams, but they are still replaceable without removing the cams.

________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com