Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectVery best intercooler???
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=413
413, Very best intercooler???
Posted by DSM StreetZeal, Dec-23-00 02:21 PM
since i havent been able to find a thicker head gasket and like my compression. I want to know the VERY best intercooler i can get to run about 7 psi with a raised comperssion. Someone said something about a water-to-air intercooler??? I want the coolest possible air.
Thanx Isaac

Merry Christmas
414, RE: Very best intercooler???
Posted by Jeff_99gs, Dec-24-00 05:30 AM
What do you mean by raised compression? Any intercooler should make it safe to run 7psi on our engines. Unless you have a higher than stock compression ratio. (if thats that case, don't even think about turbo)

Jeff

http://gs.dsmpower.com


415, What is the stock compression anyways?
Posted by immigrantRyder, Dec-24-00 05:34 AM
I've just tested mine and it from cylinder #1 (the farthest left) it went higher, like from 200-205-207-210
416, RE: What is the stock compression anyways?
Posted by BoostnRS, Dec-24-00 11:56 AM
Here's the deal with the intercoolers :

Basically any intercooler will do for running 7psi. A larger intercooler will just cause a bigger "pressure drop" unless you are running massive amounts of boost. The star kit comes with a very nice intercooler, and should be efficient for at least 350hp..
Now if you want to go with Water-to-Air intercooler: its only a good idea if you run it at the track because the ice water will heat up very fast. One thing you can do tho is run a frount mount and an air-to-water intercooler.

You can actually make your own water-to-air intercooler... Just take a very small intercooler such as the stock eclipse, and built a sheet metal box around it... and will the box with ice water... VIOLA !


good luck

417, RE: What is the stock compression anyways?
Posted by SaberKhan, Dec-24-00 04:31 PM
I had a similar idea once Martin. My uncle is a welder and I was going to get him to make me a container of sorts that would fit around my intake pipe and have it welded to the pipe. Then I was going to drill a hole in it and fill it with dry ice or some other cold substance and plug the hole with a bolt. It was just a thought.