| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | 200 shot of NX with a mastermind? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=41250 |
41250, 200 shot of NX with a mastermind?
Posted by HeartOfDarkness, Jul-07-02 05:04 PM
I wondering if i used a NX direct port system, with a Nitrous Mastermind, if a 200 shot would be possible? Also,do you think i could get away with running 93 octane, or would I have you some kind of octance booster?
http://www.jacobselectronics.com/products/timingcontrols/nmm.htm
|
41251, RE: 200 shot of NX with a mastermind?
Posted by 99Silver1100, Jul-08-02 03:57 AM
You would need more than a nitrous controler. You need a built bottem end, new fuel pump, timing retard, ect.
|
41252, RE: 200 shot of NX with a mastermind?
Posted by HeartOfDarkness, Jul-09-02 11:09 AM
Yeah, that what Im planning on doing. Im going to run a built 2.4L engine, with 24lb injectors.So is it possible? I was thinking that maybe I should buy bigger injector then the 24's. Because, isn't a 200 shot like 18 pounds of boost?
|
41253, RE: 200 shot of NX with a mastermind?
Posted by mitseclps, Jul-10-02 10:37 AM
anything is possible
|
41254, RE: 200 shot of NX with a mastermind?
Posted by Nitrous_RS1997, Jul-13-02 05:13 PM
if you get a direct port kit like you should, injectors wont have anything to do with it really. it sprays fuel independant of the injectors. upgraded fuel pump would be a must. along with an ignition, clutch, beef up tranny, do head work so you dont destroy your valves with your 200 shot. if a 200 shot is in your future, for SURE, id rebuild with lower compression. that big a shot is just too much of a risk. id stick with 150 and lower.
|
41255, RE: 200 shot of NX with a mastermind?
Posted by HeartOfDarkness, Jul-16-02 05:32 PM
Thanks.
| |